On 11/10/2025 6:26 AM, David Heidelberg via B4 Relay wrote: > This quirk is used so far for Xiaomi Poco F1. > > I'm resending it after ~ 4 years since initial send due to Snapdragon > 845 being one of best supported platform for mobile phones running > Linux, so it would be shame to not have shiny support. > > I'm very much open to suggestions how to solve this in a different way, > as the original discussion thread got quiet, see > https://lore.kernel.org/all/[email protected]/ > > There could be other devices in need of this quirk, but if they're not, > we could make it compatible specific quirk. > > Until merged, available also at: > https://gitlab.com/dhxx/linux/-/commits/b4/skip-host-cam-qmi-req > > Signed-off-by: David Heidelberg <[email protected]> > --- > Amit Pundir (3): > dt-bindings: wireless: ath10k: Introduce quirk to skip host cap QMI > requests > ath10k: Introduce a devicetree quirk to skip host cap QMI requests > arm64: dts: qcom: sdm845-xiaomi-beryllium: Enable ath10k host-cap skip > quirk > > .../devicetree/bindings/net/wireless/qcom,ath10k.yaml | 6 ++++++ > .../arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 2 ++ > drivers/net/wireless/ath/ath10k/qmi.c | 13 > ++++++++++--- > drivers/net/wireless/ath/ath10k/snoc.c | 3 +++ > drivers/net/wireless/ath/ath10k/snoc.h | 1 + > 5 files changed, 22 insertions(+), 3 deletions(-) > --- > base-commit: ab40c92c74c6b0c611c89516794502b3a3173966 > change-id: 20251110-skip-host-cam-qmi-req-e155628ebc39 > > Best regards,
The original thread predates me becoming an ath.git maintainer. Just for my information, is the firmware and board files for this platform available in linux-firmware? Or does it leverage the files already present from the original (Android?) installation? I ask because the alternative solution suggested by Kalle would require modification of the board file on the device, and that seems more of a hassle than just modifying the DT. So I'm personally OK with this suggested approach. /jeff
