Hi, I want to add these new BDFs for the SKSpruce WIA3300-20 router, Which was already supported by the OpenWrt[1-2].
* description for what hardware this is:
- IPQ4019 based router, FCC ID: 2AHKT-WIA3300-20
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- the files were extracted from the stock firmware ver. AmOS-3.6.3.300P05C5.
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=SKSpruce_WIA3300-20
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=SKSpruce_WIA3300-20
* md5sum of each new board file to add
f667b80844915163a7fa12d3bc9e0743
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=SKSpruce_WIA3300-20.bin
ff396a00b3d52bde1f13ccf0655be831
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=SKSpruce_WIA3300-20.bin
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Regards,
Shiji Yang
[1]
https://github.com/openwrt/firmware_qca-wireless/commit/dcbab62272bf5cab2ed857bc655d240970e14f2a
[2]
https://github.com/openwrt/openwrt/commit/b37f3def8690f8b81e2fb058a130358514bf2f93
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=SKSpruce_WIA3300-20.bin
Description: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=SKSpruce_WIA3300-20.bin
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=SKSpruce_WIA3300-20.bin
Description: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=SKSpruce_WIA3300-20.bin
