2007/11/30, Bruno Randolf <[EMAIL PROTECTED]>:
> added new macros ATH5K_INFO, ATH5K_WARN and ATH5K_ERR for more consistent
> logging inside ath5k. they prepend "ath5k phyX:" to all lines so we can
> distinguish between different cards in multi-card setups. ATH5K_WARN and
> ATH5K_ERR use net_ratelimit(), so they can be used anywhere without having to
> check net_ratelimit() seperately.
>
> the macros get a reference to sc, so we can automatically add additional
> information: right now it is used to get the phy name, but having this in one
> central place gived us the flexibility to switch to dev_info/warn/... or
> others
> instead too. i think using "phyX" makes the output most readable and easier to
> match with the output from mac80211. in cases where we don't have sc available
> we still use ATH5K_PRINTF.
>
> changed all printk, most dev_info and most AR5K_PRINTF lines to use these
> macros instead. deleted AR5K_PRINT because it's easy to use ATH5K_PRINTF
> instead.
>
> for base.c
> Changes-licensed-under: 3-clause-BSD
>
> for all others...
> Changes-licensed-under: ISC
>
> Signed-off-by: Bruno Randolf <[EMAIL PROTECTED]>
> ---
> drivers/net/wireless/ath5k/ath5k.h | 23 ++++++++-
> drivers/net/wireless/ath5k/base.c | 94 ++++++++++++++++-------------------
> drivers/net/wireless/ath5k/hw.c | 78 +++++++++++++++++-------------
> drivers/net/wireless/ath5k/phy.c | 31 +++++++-----
> 4 files changed, 126 insertions(+), 100 deletions(-)
>
> diff --git a/drivers/net/wireless/ath5k/ath5k.h
> b/drivers/net/wireless/ath5k/ath5k.h
> index c5e37d2..1b542f9 100644
> --- a/drivers/net/wireless/ath5k/ath5k.h
> +++ b/drivers/net/wireless/ath5k/ath5k.h
> @@ -69,8 +69,27 @@
> GENERIC DRIVER DEFINITIONS
> \****************************/
>
> -#define AR5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__)
> -#define AR5K_PRINT(fmt) printk("%s: " fmt, __func__)
> +#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__)
> +
> +#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
> + printk(_level "ath5k %s: " _fmt, \
> + ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
> + ##__VA_ARGS__)
> +
> +#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
> + if (net_ratelimit()) \
> + ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
> + } while (0)
> +
> +#define ATH5K_INFO(_sc, _fmt, ...) \
> + ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
> +
> +#define ATH5K_WARN(_sc, _fmt, ...) \
> + ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
> +
> +#define ATH5K_ERR(_sc, _fmt, ...) \
> + ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
> +
> #ifdef AR5K_DEBUG
> #define AR5K_TRACE printk(KERN_DEBUG "%s:%d\n", __func__,
> __LINE__)
> #else
> diff --git a/drivers/net/wireless/ath5k/base.c
> b/drivers/net/wireless/ath5k/base.c
> index 77e3855..31197a3 100644
> --- a/drivers/net/wireless/ath5k/base.c
> +++ b/drivers/net/wireless/ath5k/base.c
> @@ -519,6 +519,8 @@ ath5k_pci_probe(struct pci_dev *pdev,
> goto err_map;
> }
>
> + dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
> +
> /* Initialize driver private data */
> SET_IEEE80211_DEV(hw, &pdev->dev);
> hw->flags = IEEE80211_HW_RX_INCLUDES_FCS;
> @@ -554,7 +556,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
> /* Setup interrupt handler */
> ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
> if (ret) {
> - dev_err(&pdev->dev, "request_irq failed\n");
> + ATH5K_ERR(sc, "request_irq failed\n");
> goto err_free;
> }
>
> @@ -570,7 +572,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
> if (ret)
> goto err_ah;
>
> - dev_info(&pdev->dev, "Atheros AR%s chip found (MAC: 0x%x, PHY:
> 0x%x)\n",
> + ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
> ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
> sc->ah->ah_mac_srev,
> sc->ah->ah_phy_revision);
> @@ -580,27 +582,28 @@ ath5k_pci_probe(struct pci_dev *pdev,
> if(sc->ah->ah_radio_5ghz_revision &&
> !sc->ah->ah_radio_2ghz_revision) {
> /* No 5GHz support -> report 2GHz radio */
> if(!test_bit(MODE_IEEE80211A,
> sc->ah->ah_capabilities.cap_mode)){
> - dev_info(&pdev->dev, "RF%s 2GHz radio found
> (0x%x)\n",
> + ATH5K_INFO(sc, "RF%s 2GHz radio found
> (0x%x)\n",
>
> ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
>
> sc->ah->ah_radio_5ghz_revision);
> /* No 2GHz support (5110 and some 5Ghz only cards) ->
> report 5Ghz radio */
> } else if(!test_bit(MODE_IEEE80211B,
> sc->ah->ah_capabilities.cap_mode)){
> - dev_info(&pdev->dev, "RF%s 5GHz radio found
> (0x%x)\n",
> + ATH5K_INFO(sc, "RF%s 5GHz radio found
> (0x%x)\n",
>
> ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
>
> sc->ah->ah_radio_5ghz_revision);
> /* Multiband radio */
> } else {
> - dev_info(&pdev->dev, "RF%s multiband radio
> found (0x%x)\n",
> + ATH5K_INFO(sc, "RF%s multiband radio found"
> + " (0x%x)\n",
>
> ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
>
> sc->ah->ah_radio_5ghz_revision);
> }
> }
> /* Multi chip radio (RF5111 - RF2111) -> report both
> 2GHz/5GHz radios */
> else if(sc->ah->ah_radio_5ghz_revision &&
> sc->ah->ah_radio_2ghz_revision){
> - dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
> + ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
>
> ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
>
> sc->ah->ah_radio_5ghz_revision);
> - dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
> + ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
>
> ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
>
> sc->ah->ah_radio_2ghz_revision);
> }
> @@ -737,7 +740,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw
> *hw)
> */
> ret = ath5k_getchannels(hw);
> if (ret) {
> - dev_err(&pdev->dev, "can't get channels\n");
> + ATH5K_ERR(sc, "can't get channels\n");
> goto err;
> }
>
> @@ -752,7 +755,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw
> *hw)
> */
> ret = ath5k_desc_alloc(sc, pdev);
> if (ret) {
> - dev_err(&pdev->dev, "can't allocate descriptors\n");
> + ATH5K_ERR(sc, "can't allocate descriptors\n");
> goto err;
> }
>
> @@ -764,14 +767,14 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw
> *hw)
> */
> ret = ath5k_beaconq_setup(ah);
> if (ret < 0) {
> - dev_err(&pdev->dev, "can't setup a beacon xmit queue\n");
> + ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
> goto err_desc;
> }
> sc->bhalq = ret;
>
> sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
> if (IS_ERR(sc->txq)) {
> - dev_err(&pdev->dev, "can't setup xmit queue\n");
> + ATH5K_ERR(sc, "can't setup xmit queue\n");
> ret = PTR_ERR(sc->txq);
> goto err_bhal;
> }
> @@ -810,7 +813,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw
> *hw)
>
> ret = ieee80211_register_hw(hw);
> if (ret) {
> - dev_err(&pdev->dev, "can't register ieee80211 hw\n");
> + ATH5K_ERR(sc, "can't register ieee80211 hw\n");
> goto err_queues;
> }
>
> @@ -944,7 +947,7 @@ ath5k_copy_channels(struct ath5k_hw *ah,
> chfreq = CHANNEL_2GHZ;
> break;
> default:
> - printk(KERN_WARNING "bad mode, not copying channels\n");
> + ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
> return 0;
> }
>
> @@ -998,7 +1001,7 @@ ath5k_register_mode(struct ieee80211_hw *hw, u8 m)
> continue;
> ret = ieee80211_register_hwmode(hw, &modes[i]);
> if (ret) {
> - printk(KERN_ERR "can't register hwmode %u\n", m);
> + ATH5K_ERR(sc, "can't register hwmode %u\n", m);
> return ret;
> }
> return 0;
> @@ -1094,7 +1097,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct
> ieee80211_channel *chan)
> ath5k_rx_stop(sc); /* turn off frame recv */
> ret = ath5k_hw_reset(ah, sc->opmode, chan, true);
> if (ret) {
> - printk(KERN_ERR "%s: unable to reset channel %u "
> + ATH5K_ERR(sc, "%s: unable to reset channel %u "
> "(%u Mhz)\n", __func__, chan->chan,
> chan->freq);
> return ret;
> }
> @@ -1106,7 +1109,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct
> ieee80211_channel *chan)
> */
> ret = ath5k_rx_start(sc);
> if (ret) {
> - printk(KERN_ERR "%s: unable to restart recv logic\n",
> + ATH5K_ERR(sc, "%s: unable to restart recv logic\n",
> __func__);
> return ret;
> }
> @@ -1232,7 +1235,7 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev
> *pdev)
> (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
> sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
> if (sc->desc == NULL) {
> - dev_err(&pdev->dev, "can't allocate descriptors\n");
> + ATH5K_ERR(sc, "can't allocate descriptors\n");
> ret = -ENOMEM;
> goto err;
> }
> @@ -1244,7 +1247,7 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev
> *pdev)
> bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
> sizeof(struct ath5k_buf), GFP_KERNEL);
> if (bf == NULL) {
> - dev_err(&pdev->dev, "can't allocate bufptr\n");
> + ATH5K_ERR(sc, "can't allocate bufptr\n");
> ret = -ENOMEM;
> goto err_free;
> }
> @@ -1320,7 +1323,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct
> ath5k_buf *bf)
> */
> skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
> if (unlikely(skb == NULL)) {
> - printk(KERN_ERR "ath: can't alloc skbuff of size
> %u\n",
> + ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
> sc->rxbufsize + sc->cachelsz - 1);
> return -ENOMEM;
> }
> @@ -1337,7 +1340,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct
> ath5k_buf *bf)
> bf->skbaddr = pci_map_single(sc->pdev,
> skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
> if (unlikely(pci_dma_mapping_error(bf->skbaddr))) {
> - printk(KERN_ERR "%s: DMA mapping failed\n", __func__);
> + ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
> dev_kfree_skb(skb);
> bf->skb = NULL;
> return -ENOMEM;
> @@ -1482,7 +1485,7 @@ ath5k_txq_setup(struct ath5k_softc *sc,
> return ERR_PTR(qnum);
> }
> if (qnum >= ARRAY_SIZE(sc->txqs)) {
> - printk(KERN_ERR "hw qnum %u out of range, max %tu!\n",
> + ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
> qnum, ARRAY_SIZE(sc->txqs));
> ath5k_hw_release_tx_queue(ah, qnum);
> return ERR_PTR(-EINVAL);
> @@ -1535,7 +1538,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
>
> ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi);
> if (ret) {
> - printk(KERN_ERR "%s: unable to update parameters for beacon "
> + ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
> "hardware queue!\n", __func__);
> return ret;
> }
> @@ -1739,8 +1742,7 @@ ath5k_tasklet_rx(unsigned long data)
> spin_lock(&sc->rxbuflock);
> do {
> if (unlikely(list_empty(&sc->rxbuf))) {
> - if (net_ratelimit())
> - printk(KERN_WARNING "ath: empty rx buf
> pool\n");
> + ATH5K_WARN(sc, "empty rx buf pool\n");
> break;
> }
> bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
> @@ -1759,15 +1761,12 @@ ath5k_tasklet_rx(unsigned long data)
> if (unlikely(ret == -EINPROGRESS))
> break;
> else if (unlikely(ret)) {
> - if (net_ratelimit())
> - printk(KERN_ERR "ath: error in processing rx "
> - "descriptor\n");
> + ATH5K_ERR(sc, "error in processing rx descriptor\n");
> return;
> }
>
> if (unlikely(ds->ds_rxstat.rs_more)) {
> - if (net_ratelimit())
> - printk(KERN_INFO "ath: unsupported jumbo\n");
> + ATH5K_WARN(sc, "unsupported jumbo\n");
> goto next;
> }
>
> @@ -1874,8 +1873,8 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct
> ath5k_txq *txq)
> if (unlikely(ret == -EINPROGRESS))
> break;
> else if (unlikely(ret)) {
> - printk(KERN_ERR "ath: error %d while processing "
> - "queue %u\n", ret, txq->qnum);
> + ATH5K_ERR(sc, "error %d while processing queue %u\n",
> + ret, txq->qnum);
> break;
> }
>
> @@ -1950,7 +1949,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct
> ath5k_buf *bf,
> "skbaddr %llx\n", __func__, skb, skb->data, skb->len,
> (unsigned long long)bf->skbaddr);
> if (pci_dma_mapping_error(bf->skbaddr)) {
> - printk(KERN_ERR "ath: beacon DMA mapping failed\n");
> + ATH5K_ERR(sc, "beacon DMA mapping failed\n");
> return -EIO;
> }
>
> @@ -2006,8 +2005,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
>
> if (unlikely(bf->skb == NULL || sc->opmode == IEEE80211_IF_TYPE_STA ||
> sc->opmode == IEEE80211_IF_TYPE_MNTR)) {
> - printk(KERN_WARNING "ath: bf=%p bf_skb=%p\n", bf,
> - bf ? bf->skb : NULL);
> + ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
> return;
> }
> /*
> @@ -2043,8 +2041,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
> * are still pending on the queue.
> */
> if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
> - printk(KERN_WARNING "ath: beacon queue %u didn't stop?\n",
> - sc->bhalq);
> + ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
> /* NB: hw still stops DMA, so proceed */
> }
> pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
> @@ -2184,7 +2181,7 @@ ath5k_init(struct ath5k_softc *sc)
> sc->curchan = sc->hw->conf.chan;
> ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false);
> if (ret) {
> - printk(KERN_ERR "unable to reset hardware: %d\n", ret);
> + ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret);
> goto done;
> }
> /*
> @@ -2376,9 +2373,8 @@ ath5k_intr(int irq, void *dev_id)
> }
> } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
>
> - if (unlikely(!counter && net_ratelimit()))
> - printk(KERN_WARNING "ath: too many interrupts, giving up for "
> - "now\n");
> + if (unlikely(!counter))
> + ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
>
> return IRQ_HANDLED;
> }
> @@ -2419,7 +2415,7 @@ ath5k_calibrate(unsigned long data)
> ath5k_reset(sc->hw);
> }
> if (ath5k_hw_phy_calibrate(ah, sc->curchan))
> - printk(KERN_ERR "ath: calibration of channel %u failed\n",
> + ATH5K_ERR(sc, "calibration of channel %u failed\n",
> sc->curchan->chan);
>
> mod_timer(&sc->calib_tim, round_jiffies(jiffies +
> @@ -2510,10 +2506,8 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
> if (hdrlen & 3) {
> pad = hdrlen % 4;
> if (skb_headroom(skb) < pad) {
> - if (net_ratelimit())
> - printk(KERN_ERR "ath: tx hdrlen not %%4: %d "
> - "not enough headroom to pad %d\n",
> - hdrlen, pad);
> + ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
> + " headroom to pad %d\n", hdrlen, pad);
> return -1;
> }
> skb_push(skb, pad);
> @@ -2524,9 +2518,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
>
> spin_lock_irqsave(&sc->txbuflock, flags);
> if (list_empty(&sc->txbuf)) {
> - if (net_ratelimit())
> - printk(KERN_ERR "ath: no further txbuf available, "
> - "dropping packet\n");
> + ATH5K_ERR(sc, "no further txbuf available, dropping
> packet\n");
> spin_unlock_irqrestore(&sc->txbuflock, flags);
> ieee80211_stop_queue(hw, ctl->queue);
> return -1;
> @@ -2573,14 +2565,14 @@ ath5k_reset(struct ieee80211_hw *hw)
>
> ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
> if (unlikely(ret)) {
> - printk(KERN_ERR "ath: can't reset hardware (%d)\n", ret);
> + ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
> goto err;
> }
> ath5k_update_txpow(sc);
>
> ret = ath5k_rx_start(sc);
> if (unlikely(ret)) {
> - printk(KERN_ERR "ath: can't start recv logic\n");
> + ATH5K_ERR(sc, "can't start recv logic\n");
> goto err;
> }
> /*
> @@ -2845,7 +2837,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd
> cmd,
> case SET_KEY:
> ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, addr);
> if (ret) {
> - printk(KERN_ERR "ath: can't set the key\n");
> + ATH5K_ERR(sc, "can't set the key\n");
> goto unlock;
> }
> __set_bit(key->keyidx, sc->keymap);
> diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
> index 4aca069..0cdc195 100644
> --- a/drivers/net/wireless/ath5k/hw.c
> +++ b/drivers/net/wireless/ath5k/hw.c
> @@ -128,7 +128,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc,
> u8 mac_version)
> ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
> if (ah == NULL) {
> ret = -ENOMEM;
> - AR5K_PRINT("out of memory\n");
> + ATH5K_ERR(sc, "out of memory\n");
> goto err;
> }
>
> @@ -203,14 +203,14 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc
> *sc, u8 mac_version)
>
> /* Return on unsuported chips (unsupported eeprom etc) */
> if(srev >= AR5K_SREV_VER_AR5416){
> - printk(KERN_ERR "ath5k: Device not yet supported.\n");
> + ATH5K_ERR(sc, "Device not yet supported.\n");
> ret = -ENODEV;
> goto err_free;
> }
>
> /* Warn for partially supported chips (unsupported phy etc) */
> if(srev >= AR5K_SREV_VER_AR2424){
> - printk(KERN_DEBUG "ath5k: Device partially supported.\n");
> + ATH5K_WARN(sc, "Device only partially supported.\n");
> }
>
> /* Identify single chip solutions */
> @@ -248,14 +248,14 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc
> *sc, u8 mac_version)
>
> ret = ath5k_eeprom_init(ah);
> if (ret) {
> - AR5K_PRINT("unable to init EEPROM\n");
> + ATH5K_ERR(sc, "unable to init EEPROM\n");
> goto err_free;
> }
>
> /* Get misc capabilities */
> ret = ath5k_hw_get_capabilities(ah);
> if (ret) {
> - AR5K_PRINTF("unable to get device capabilities: 0x%04x\n",
> + ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
> sc->pdev->device);
> goto err_free;
> }
> @@ -263,7 +263,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc,
> u8 mac_version)
> /* Get MAC address */
> ret = ath5k_eeprom_read_mac(ah, mac);
> if (ret) {
> - AR5K_PRINTF("unable to read address from EEPROM: 0x%04x\n",
> + ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
> sc->pdev->device);
> goto err_free;
> }
> @@ -328,7 +328,8 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int
> flags, bool initial)
> else
> mode |= AR5K_PHY_MODE_MOD_DYN;
> } else {
> - AR5K_PRINT("invalid radio modulation mode\n");
> + ATH5K_ERR(ah->ah_sc,
> + "invalid radio modulation mode\n");
> return -EINVAL;
> }
> } else if (flags & CHANNEL_5GHZ) {
> @@ -338,11 +339,12 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int
> flags, bool initial)
> if (flags & CHANNEL_OFDM)
> mode |= AR5K_PHY_MODE_MOD_OFDM;
> else {
> - AR5K_PRINT("invalid radio modulation mode\n");
> + ATH5K_ERR(ah->ah_sc,
> + "invalid radio modulation mode\n");
> return -EINVAL;
> }
> } else {
> - AR5K_PRINT("invalid radio frequency mode\n");
> + ATH5K_ERR(ah->ah_sc, "invalid radio frequency
> mode\n");
> return -EINVAL;
> }
>
> @@ -352,7 +354,8 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int
> flags, bool initial)
> if (initial == true) {
> /* ...reset hardware */
> if (ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCI)) {
> - AR5K_PRINT("failed to reset the PCI
> chipset\n");
> + ATH5K_ERR(ah->ah_sc,
> + "failed to reset the PCI chipset\n");
> return -EIO;
> }
>
> @@ -362,7 +365,7 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int
> flags, bool initial)
> /* ...wakeup */
> ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
> if (ret) {
> - AR5K_PRINT("failed to resume the MAC Chip\n");
> + ATH5K_ERR(ah->ah_sc, "failed to resume the MAC
> Chip\n");
> return ret;
> }
>
> @@ -373,7 +376,8 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int
> flags, bool initial)
>
> /* ...reset chipset */
> if (ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_CHIP)) {
> - AR5K_PRINT("failed to reset the AR5210 chipset\n");
> + ATH5K_ERR(ah->ah_sc,
> + "failed to reset the AR5210 chipset\n");
> return -EIO;
> }
>
> @@ -383,7 +387,7 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int
> flags, bool initial)
> /* ...reset chipset and PCI device */
> if (ah->ah_single_chip == false && ath5k_hw_nic_reset(ah,
> AR5K_RESET_CTL_CHIP | AR5K_RESET_CTL_PCI)) {
> - AR5K_PRINT("failed to reset the MAC Chip + PCI\n");
> + ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip + PCI\n");
> return -EIO;
> }
>
> @@ -393,13 +397,13 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int
> flags, bool initial)
> /* ...wakeup */
> ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
> if (ret) {
> - AR5K_PRINT("failed to resume the MAC Chip\n");
> + ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
> return ret;
> }
>
> /* ...final warm reset */
> if (ath5k_hw_nic_reset(ah, 0)) {
> - AR5K_PRINT("failed to warm reset the MAC Chip\n");
> + ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
> return -EIO;
> }
>
> @@ -643,7 +647,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum
> ieee80211_if_types op_mode,
> if (ah->ah_radio != AR5K_RF5111 &&
> ah->ah_radio != AR5K_RF5112 &&
> ah->ah_radio != AR5K_RF5413) {
> - AR5K_PRINTF("invalid phy radio: %u\n", ah->ah_radio);
> + ATH5K_ERR(ah->ah_sc,
> + "invalid phy radio: %u\n", ah->ah_radio);
> return -EINVAL;
> }
>
> @@ -681,7 +686,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum
> ieee80211_if_types op_mode,
> break;
> case CHANNEL_XR:
> if (ah->ah_version == AR5K_AR5211) {
> - AR5K_PRINTF("XR mode not available on 5211");
> + ATH5K_ERR(ah->ah_sc,
> + "XR mode not available on 5211");
> return -EINVAL;
> }
> mode = AR5K_INI_VAL_XR;
> @@ -690,7 +696,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum
> ieee80211_if_types op_mode,
> driver_mode = MODE_IEEE80211A;
> break;
> default:
> - AR5K_PRINTF("invalid channel: %d\n", channel->freq);
> + ATH5K_ERR(ah->ah_sc,
> + "invalid channel: %d\n", channel->freq);
> return -EINVAL;
> }
>
> @@ -905,7 +912,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum
> ieee80211_if_types op_mode,
>
> if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
> AR5K_PHY_AGCCTL_CAL, 0, false)) {
> - AR5K_PRINTF("calibration timeout (%uMHz)\n", channel->freq);
> + ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
> + channel->freq);
> return -EAGAIN;
> }
>
> @@ -917,8 +925,9 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum
> ieee80211_if_types op_mode,
>
> if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
> AR5K_PHY_AGCCTL_NF, 0, false)) {
> - AR5K_PRINTF("noise floor calibration timeout (%uMHz)\n",
> - channel->freq);
> + ATH5K_ERR(ah->ah_sc,
> + "noise floor calibration timeout (%uMHz)\n",
> + channel->freq);
> return -EAGAIN;
> }
>
> @@ -935,7 +944,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum
> ieee80211_if_types op_mode,
> }
>
> if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
> - AR5K_PRINTF("noise floor calibration failed (%uMHz)\n",
> + ATH5K_ERR(ah->ah_sc,
> + "noise floor calibration failed (%uMHz)\n",
> channel->freq);
> return -EIO;
> }
> @@ -962,7 +972,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum
> ieee80211_if_types op_mode,
>
> ret = ath5k_hw_reset_tx_queue(ah, i);
> if (ret) {
> - AR5K_PRINTF("failed to reset TX queue #%d\n", i);
> + ATH5K_ERR(ah->ah_sc,
> + "failed to reset TX queue #%d\n", i);
> return ret;
> }
> }
> @@ -1504,7 +1515,7 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum
> ath5k_int *interrupt_mask)
> * print the register value.
> */
> if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
> - AR5K_PRINTF("0x%08x\n", data);
> + ATH5K_PRINTF("0x%08x\n", data);
>
> return 0;
> }
> @@ -1645,7 +1656,7 @@ static int ath5k_hw_eeprom_write(struct ath5k_hw *ah,
> u32 offset, u16 data)
> udelay(15);
> }
> #endif
> - AR5K_PRINTF("EEPROM Write is disabled!");
> + ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!");
> return -EIO;
> }
>
> @@ -1856,7 +1867,7 @@ static int ath5k_eeprom_init(struct ath5k_hw *ah)
> cksum ^= val;
> }
> if (cksum != AR5K_EEPROM_INFO_CKSUM) {
> - AR5K_PRINTF("Invalid EEPROM checksum 0x%04x\n", cksum);
> + ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n",
> cksum);
> return -EIO;
> }
> #endif
> @@ -3092,8 +3103,9 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum
> ath5k_tx_queue queue_type,
> break;
> case AR5K_TX_QUEUE_XR_DATA:
> if (ah->ah_version != AR5K_AR5212)
> - AR5K_PRINTF("XR data queues only supported in
> "
> - "5212!\n");
> + ATH5K_ERR(ah->ah_sc,
> + "XR data queues only supported in"
> + " 5212!\n");
> queue = AR5K_TX_QUEUE_ID_XR_DATA;
> break;
> default:
> @@ -4232,9 +4244,9 @@ ath5k_hw_dump_state(struct ath5k_hw *ah)
> {
> #ifdef AR5K_DEBUG
> #define AR5K_PRINT_REGISTER(_x)
> \
> - AR5K_PRINTF("(%s: %08x) ", #_x, ath5k_hw_reg_read(ah, AR5K_##_x));
> + ATH5K_PRINTF("(%s: %08x) ", #_x, ath5k_hw_reg_read(ah, AR5K_##_x));
>
> - AR5K_PRINT("MAC registers:\n");
> + ATH5K_PRINTF("MAC registers:\n");
> AR5K_PRINT_REGISTER(CR);
> AR5K_PRINT_REGISTER(CFG);
> AR5K_PRINT_REGISTER(IER);
> @@ -4302,9 +4314,9 @@ ath5k_hw_dump_state(struct ath5k_hw *ah)
> AR5K_PRINT_REGISTER(FCS_FAIL);
> AR5K_PRINT_REGISTER(BEACON_CNT);
> AR5K_PRINT_REGISTER(TSF_PARM);
> - AR5K_PRINT("\n");
> + ATH5K_PRINTF("\n");
>
> - AR5K_PRINT("PHY registers:\n");
> + ATH5K_PRINTF("PHY registers:\n");
> AR5K_PRINT_REGISTER(PHY_TURBO);
> AR5K_PRINT_REGISTER(PHY_AGC);
> AR5K_PRINT_REGISTER(PHY_TIMING_3);
> @@ -4322,7 +4334,7 @@ ath5k_hw_dump_state(struct ath5k_hw *ah)
> AR5K_PRINT_REGISTER(PHY_RADAR);
> AR5K_PRINT_REGISTER(PHY_ANT_SWITCH_TABLE_0);
> AR5K_PRINT_REGISTER(PHY_ANT_SWITCH_TABLE_1);
> - AR5K_PRINT("\n");
> + ATH5K_PRINTF("\n");
> #endif
> }
>
> diff --git a/drivers/net/wireless/ath5k/phy.c
> b/drivers/net/wireless/ath5k/phy.c
> index d5aec18..a4968b6 100644
> --- a/drivers/net/wireless/ath5k/phy.c
> +++ b/drivers/net/wireless/ath5k/phy.c
> @@ -23,6 +23,7 @@
>
> #include "ath5k.h"
> #include "reg.h"
> +#include "base.h"
>
> /* Struct to hold initial RF register values (RF Banks) */
> struct ath5k_ini_rf {
> @@ -719,7 +720,7 @@ static unsigned int ath5k_hw_rfregs_op(u32 *rf, u32
> offset, u32 reg, u32 bits,
> return 0;
>
> if (!(col <= 3 && bits <= 32 && first + bits <= 319)) {
> - AR5K_PRINTF("invalid values at offset %u\n", offset);
> + ATH5K_PRINTF("invalid values at offset %u\n", offset);
> return 0;
> }
>
> @@ -880,11 +881,10 @@ static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw
> *ah)
>
> done:
> #ifdef AR5K_DEBUG
> - AR5K_PRINTF("ret %d, gain step %u, current gain %u, target gain %u\n",
> + ATH5K_PRINTF("ret %d, gain step %u, current gain %u, target gain
> %u\n",
> ret, ah->ah_gain.g_step_idx, ah->ah_gain.g_current,
> ah->ah_gain.g_target);
> #endif
> -
> return ret;
> }
>
> @@ -908,7 +908,7 @@ static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah,
> /* Copy values to modify them */
> for (i = 0; i < rf_size; i++) {
> if (rfregs_5111[i].rf_bank >= AR5K_RF5111_INI_RF_MAX_BANKS) {
> - AR5K_PRINT("invalid bank\n");
> + ATH5K_ERR(ah->ah_sc, "invalid bank\n");
> return -EINVAL;
> }
>
> @@ -1017,7 +1017,7 @@ static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah,
> /* Copy values to modify them */
> for (i = 0; i < rf_size; i++) {
> if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) {
> - AR5K_PRINT("invalid bank\n");
> + ATH5K_ERR(ah->ah_sc, "invalid bank\n");
> return -EINVAL;
> }
>
> @@ -1105,7 +1105,7 @@ static int ath5k_hw_rf5413_rfregs(struct ath5k_hw *ah,
> /* Copy values to modify them */
> for (i = 0; i < rf_size; i++) {
> if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) {
> - AR5K_PRINT("invalid bank\n");
> + ATH5K_ERR(ah->ah_sc, "invalid bank\n");
> return -EINVAL;
> }
>
> @@ -1167,7 +1167,7 @@ int ath5k_hw_rfregs(struct ath5k_hw *ah, struct
> ieee80211_channel *channel,
> /* XXX do extra checks? */
> ah->ah_rf_banks = kmalloc(ah->ah_rf_banks_size, GFP_KERNEL);
> if (ah->ah_rf_banks == NULL) {
> - AR5K_PRINT("out of memory\n");
> + ATH5K_ERR(ah->ah_sc, "out of memory\n");
> return -ENOMEM;
> }
> }
> @@ -1484,7 +1484,8 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct
> ieee80211_channel *channel)
> channel->freq > ah->ah_capabilities.cap_range.range_2ghz_max) &&
> (channel->freq < ah->ah_capabilities.cap_range.range_5ghz_min ||
> channel->freq > ah->ah_capabilities.cap_range.range_5ghz_max)) {
> - AR5K_PRINTF("channel out of supported range (%u MHz)\n",
> + ATH5K_ERR(ah->ah_sc,
> + "channel out of supported range (%u MHz)\n",
> channel->freq);
> return -EINVAL;
> }
> @@ -1605,7 +1606,8 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw
> *ah,
> ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT);
>
> if (ret) {
> - AR5K_PRINTF("calibration timeout (%uMHz)\n", channel->freq);
> + ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
> + channel->freq);
> return ret;
> }
>
> @@ -1617,8 +1619,9 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw
> *ah,
> ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
> AR5K_PHY_AGCCTL_NF, 0, false);
> if (ret) {
> - AR5K_PRINTF("noise floor calibration timeout (%uMHz)\n",
> - channel->freq);
> + ATH5K_ERR(ah->ah_sc,
> + "noise floor calibration timeout (%uMHz)\n",
> + channel->freq);
> return ret;
> }
>
> @@ -1635,7 +1638,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw
> *ah,
> }
>
> if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
> - AR5K_PRINTF("noise floor calibration failed (%uMHz)\n",
> + ATH5K_ERR(ah->ah_sc, "noise floor calibration failed
> (%uMHz)\n",
> channel->freq);
> return -EIO;
> }
> @@ -1847,7 +1850,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct
> ieee80211_channel *channel,
>
> AR5K_TRACE;
> if (txpower > AR5K_TUNE_MAX_TXPOWER) {
> - AR5K_PRINTF("invalid tx power: %u\n", txpower);
> + ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
> return -EINVAL;
> }
>
> @@ -1901,7 +1904,7 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah,
> unsigned int power)
>
> AR5K_TRACE;
> #ifdef AR5K_DEBUG
> - AR5K_PRINTF("changing txpower to %d\n", power);
> + ATH5K_PRINTF("changing txpower to %d\n", power);
> #endif
> return ath5k_hw_txpower(ah, channel, power);
> }
> --
> 1.5.3.4
>
>
Acked-by: Nick Kossifidis <[EMAIL PROTECTED]>
--
GPG ID: 0xD21DB2DB
As you read this post global entropy rises. Have Fun ;-)
Nick
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
