Nick,
I might be the kernel I am using, this is on a t60
03:00.0 0200: 168c:1014 (rev 01)
Subsystem: 1014:058a
Flags: fast devsel, IRQ 82
Memory at edf00000 (64-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Capabilities: [60] Express Legacy Endpoint IRQ 0
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Loading the module I see the following.
ath5k_pci 0000:03:00.0: registered as 'phy0'
ath5k phy0: failed to resume the MAC Chip
ath5k_pci: probe of 0000:03:00.0 failed with error -5
Nick Kossifidis wrote:
> By checking it's pci id this seems to be an IBM minipci. It should
> work. Did you have any problems with it ?
>
> 2007/12/11, Grant Williamson <[EMAIL PROTECTED]>:
>
>> Hi,
>> would I be correct in saying that a PCI Express AR5212 168c:1014
>> card is not yet supported by ath5k?
>>
>> Thanks in advance.
>> _______________________________________________
>> ath5k-devel mailing list
>> ath5k-devel@lists.ath5k.org
>> https://lists.ath5k.org/mailman/listinfo/ath5k-devel
>>
>>
>
>
>
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
