2009/1/31 Felix Fietkau <n...@openwrt.org>: > Nick Kossifidis wrote: >> * Clean up initial rf buffer settings (new file rfbufer.h) and >> introduce a new way to access specific rf registers (will use it >> later) >> >> * Clean up initial rf gain settings by moving them on a new file >> (rfgain.h) so we can later work on gain optimization functions >> >> * Update initial rf buffer settings and initial rf gain settings from >> HALs. This breaks things for now because our current dumps come from >> pre-configured rf buffer (regdumps already had the needed values set >> from binary HAL). >> >> Signed-Off-by: Nick Kossifidis <mickfl...@gmail.com> > For the whole series: > Acked-by: Felix Fietkau <n...@openwrt.org> > > Nick: Do you want me to rebase my 2413 RF changes on top of > this series? Another thing: could you please test if my stuff also > works on RF2425? I don't have such a card. >
Sure i'll test it asap and let you know but i don't have access to the spectrum analyzer right now (i'm still in Athens), all i can check is that card works better than before (i guess it'll be fine, all post-2413 chips have the same power table stuff if i recall corectly). Feel free to rebase your changes just force a low tx power value for now so we are not out of regulatory restrictions (i guess 3dbms are enough) or even better comment out hw_txpower. Thanks a lot for the ACK ;-) -- GPG ID: 0xD21DB2DB As you read this post global entropy rises. Have Fun ;-) Nick _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel
