* DCU early termination should be used to quickly flush QCU
according to docs so don't enable it for all queues, enable
it only when stopping each queue and disable it when we are
done.
Signed-off-by: Nick Kossifidis <mickfl...@gmail.com>
---
drivers/net/wireless/ath/ath5k/dma.c | 14 ++++++++++++++
drivers/net/wireless/ath/ath5k/qcu.c | 3 ---
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/dma.c
b/drivers/net/wireless/ath/ath5k/dma.c
index e39c953..bfdfcff 100644
--- a/drivers/net/wireless/ath/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -216,6 +216,14 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int
queue)
ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
ath5k_hw_reg_read(ah, AR5K_CR);
} else {
+
+ /*
+ * Enable DCU early termination to quickly
+ * flush any pending frames from QCU
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_DCU_EARLY);
+
/*
* Schedule TX disable and wait until queue is empty
*/
@@ -285,6 +293,12 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int
queue)
queue);
}
+ /*
+ * Disable DCU early termination
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_DCU_EARLY);
+
/* Clear register */
ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
if (pending) {
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c
b/drivers/net/wireless/ath/ath5k/qcu.c
index 52eee34f..ed62273 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -340,9 +340,6 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned
int queue)
/*
* Set misc registers
*/
- /* Enable DCU early termination for this queue */
- AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
- AR5K_QCU_MISC_DCU_EARLY);
/* Enable DCU to wait for next fragment from QCU */
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
