Let ath5k_hw_txpower() decide if it can re-use the powertable or if it has to
be recalculated instead of passing a 'fast' flag from the outside.
Signed-off-by: Bruno Randolf <b...@einfach.org>
---
drivers/net/wireless/ath/ath5k/ath5k.h | 1 +
drivers/net/wireless/ath/ath5k/phy.c | 35 ++++++++++++--------------------
2 files changed, 14 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h
b/drivers/net/wireless/ath/ath5k/ath5k.h
index d6e7440..e6491bf 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1113,6 +1113,7 @@ struct ath5k_hw {
s16 txp_cck_ofdm_gainf_delta;
/* Value in dB units */
s16 txp_cck_ofdm_pwr_delta;
+ bool txp_setup;
} ah_txpower;
struct {
diff --git a/drivers/net/wireless/ath/ath5k/phy.c
b/drivers/net/wireless/ath/ath5k/phy.c
index f84afb4..7c6d7dc 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -3004,6 +3004,8 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
return -EINVAL;
}
+ ah->ah_txpower.txp_setup = true;
+
return 0;
}
@@ -3105,9 +3107,10 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16
max_pwr,
*/
static int
ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
- u8 ee_mode, u8 txpower, bool fast)
+ u8 ee_mode, u8 txpower)
{
struct ath5k_rate_pcal_info rate_info;
+ struct ieee80211_channel *curr_channel = ah->ah_current_channel;
u8 type;
int ret;
@@ -3138,10 +3141,13 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct
ieee80211_channel *channel,
return -EINVAL;
}
- /* If fast is set it means we are on the same channel/mode
- * so there is no need to recalculate the powertable, we 'll
- * just use the cached one */
- if (!fast) {
+ /*
+ * If we don't change channel/mode skip tx powertable calculation
+ * and use the cached one.
+ */
+ if (!ah->ah_txpower.txp_setup ||
+ (channel->hw_value != curr_channel->hw_value) ||
+ (channel->center_freq != curr_channel->center_freq)) {
/* Reset TX power values */
memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
@@ -3159,8 +3165,6 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct
ieee80211_channel *channel,
else
ath5k_setup_pcdac_table(ah);
-
-
/* Limit max power if we have a CTL available */
ath5k_get_max_ctl_power(ah, channel);
@@ -3238,7 +3242,7 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8
txpower)
ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
"changing txpower to %d\n", txpower);
- return ath5k_hw_txpower(ah, channel, ee_mode, txpower, true);
+ return ath5k_hw_txpower(ah, channel, ee_mode, txpower);
}
/*************\
@@ -3251,7 +3255,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct
ieee80211_channel *channel,
struct ieee80211_channel *curr_channel;
int ret, i;
u32 phy_tst1;
- bool fast_txp;
ret = 0;
/*
@@ -3282,17 +3285,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct
ieee80211_channel *channel,
}
/*
- * If we don't change channel/mode skip
- * tx powertable calculation and use the
- * cached one.
- */
- if ((channel->hw_value == curr_channel->hw_value) &&
- (channel->center_freq == curr_channel->center_freq))
- fast_txp = true;
- else
- fast_txp = false;
-
- /*
* Set TX power
*
* Note: We need to do that before we set
@@ -3300,8 +3292,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct
ieee80211_channel *channel,
* properly set curve indices.
*/
ret = ath5k_hw_txpower(ah, channel, ee_mode,
- ah->ah_txpower.txp_max_pwr / 2,
- fast_txp);
+ ah->ah_txpower.txp_max_pwr / 2);
if (ret)
return ret;
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
