On Wed, May 04, 2011 at 01:27:17PM -0400, John W. Linville wrote: > On Wed, May 04, 2011 at 10:38:19AM -0500, Seth Forshee wrote: > > I've been investigating some reports of a regression in associating with > > APs with AR2413 in 2.6.38. Association repeatedly fails with some > > "direct probe to x timed out" messages (see syslog excerpt below), > > although it will generally associate eventually, after many tries. > > > > Bisection identifies 8aec7af (ath5k: Support synth-only channel change > > for AR2413/AR5413) as offending commit. Prior to this commit there are > > no direct probe messages at all in the logs. I've also found that > > forcing fast to false at the top of ath5k_hw_reset() fixes the issue. > > I'm not sure what the connection is between this commit and the > > timeouts. Any suggestions? > > Have you tried reverting that commit on top of 2.6.38? Can you > recreate the issue with 2.6.39-rc6 (or later)?
I started to revert that commit, but it wasn't straight-forward due to later changes. Forcing fast to false in ath5k_hw_reset() acts as a functional revert of sorts since that should force it back to a full reset for all channel changes, and it's much simpler than working out the right way to revert the commit. I think the results suggest strongly that a revert is likely to fix the problem. I can finish the work to revert if you'd still like to see the results. Testing a previous .39-rc kernel still exhibited the failure. I don't recall which one it was and apparently forgot to make note of it. I'll request testing against rc6. Thanks, Seth _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel
