During scans the full calibration usually does not make much sense,
PAPD probing and IQ calibration should be deferred until there is
enough time to complete them. Adding 100 ms to the initial full
calibration delay should be enough to do this.
Signed-off-by: Felix Fietkau <n...@openwrt.org>
Acked-by: Nick Kossifidis <mickfl...@gmail.com>
---
drivers/net/wireless/ath/ath5k/base.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/base.c
b/drivers/net/wireless/ath/ath5k/base.c
index 523bb08..3b58e00 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2725,7 +2725,7 @@ ath5k_reset(struct ath5k_softc *sc, struct
ieee80211_channel *chan,
ath5k_ani_init(ah, ani_mode);
- ah->ah_cal_next_full = jiffies;
+ ah->ah_cal_next_full = jiffies + msecs_to_jiffies(100);
ah->ah_cal_next_ani = jiffies;
ah->ah_cal_next_nf = jiffies;
ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8);
--
1.7.3.2
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
