rates[i] is unsigned but txp_offset can be negative for newer parts
with PDADC table. We cover the case when rates[i] + txp_offset > 63
but we must also cover the case when its < 0 or else rates[i] will overflow.
Signed-off-by: Nick Kossifidis <mickfl...@gmail.com>
---
drivers/net/wireless/ath/ath5k/phy.c | 10 +++++++---
1 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/phy.c
b/drivers/net/wireless/ath/ath5k/phy.c
index aa1a77d..84a9aaf 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -3516,6 +3516,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16
max_pwr,
{
unsigned int i;
u16 *rates;
+ s16 rate_idx_scaled = 0;
/* max_pwr is power level we got from driver/user in 0.5dB
* units, switch to 0.25dB units so we can compare */
@@ -3580,10 +3581,13 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16
max_pwr,
* match the power range set by user with the power indices
* on PCDAC/PDADC table */
for (i = 0; i < 16; i++) {
- rates[i] += ah->ah_txpower.txp_offset;
+ rate_idx_scaled = rates[i] + ah->ah_txpower.txp_offset;
/* Don't get out of bounds */
- if (rates[i] > 63)
- rates[i] = 63;
+ if (rate_idx_scaled > 63)
+ rate_idx_scaled = 63;
+ if (rate_idx_scaled < 0)
+ rate_idx_scaled = 0;
+ rates[i] = rate_idx_scaled;
}
}
--
1.7.3.4
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
