On Tue, Apr 5, 2011 at 1:29 PM, Felix Fietkau <n...@openwrt.org> wrote:
> On 2011-04-05 7:52 PM, Kucherenko Valeriy wrote:
>>> Are you using the ath9k rate control or are you using minstrel_ht? My
>>> tests were done with minstrel_ht. You can enable it by disabling the
>>> config option for the ath9k rate control.
HTH; if not, please excuse the waste of time; this is from stock
r26460 on Ubiquiti M900 and Loco M900:
root@OpenWrt:~# iw wlan0 station dump
Station 00:15:6d:9c:16:df (on wlan0)
inactive time: 840 ms
rx bytes: 628
rx packets: 22
tx bytes: 560
tx packets: 11
tx retries: 65
tx failed: 7
signal: -97 dBm
signal avg: -96 dBm
tx bitrate: 104.0 MBit/s MCS 13
rx bitrate: 6.5 MBit/s MCS 0
best regards/ldv
--
Larry Vaden, CoFounder
Internet Texoma, Inc.
Serving Rural Texomaland Since 1995
We Care About Your Connection!
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
