On Fri, Jul 29, 2011 at 3:28 PM, Vic Demuzere <v...@demuzere.be> wrote: > Hi there, > > I have a really strange issue with my Atheros WiFi card. It doesn't > manage to connect to my wireless AP, except when I first boot windows > and then reboot to Arch linux. So it looks like ath9k doesn't manage > to start the card properly. Output from dmesg is the same in both > cases, and the card correctly shows up in lspci.
please provide lspci > > [sorcix@morpheus ~]$ dmesg | grep ath > ath9k 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 > ath: EEPROM regdomain: 0x30 > ath: EEPROM indicates we should expect a direct regpair map > ath: Country alpha2 being used: AM > ath: Regpair used: 0x30 > ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' > Registered led device: ath9k-phy0 > > I tried Arch netcfg, networkmanager and manually using wpa_supplicant. > When I didn't boot windows first, the card seems to connect to the AP, > and then disconnect again. > > wlan0: deauthenticating from xx:xx:xx:xx:xx:xx by local choice (reason=3) > > It then starts looping trying to reconnect. > > After first booting into windows, it simply connects and stays > connected. Everything works fine then. Note that it always works fine > in windows, so it isn't a hardware problem. > > Does anyone else have this problem, or knows how to fix it? what is the kernel version you are using , can you get debug messages http://linuxwireless.org/en/users/Drivers/ath9k/debug > > -- > v...@demuzere.be :: http://vic.demuzere.be :: PGP: 0x6690CF94 > My software never contains bugs, it just develops random features. > _______________________________________________ > ath9k-devel mailing list > ath9k-devel@lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > -- shafi _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
