On Fri, 5 Aug 2011 09:48:42 +0300 sami ahokas <sami.m.aho...@gmail.com> wrote:
> I don't know if my issue is related to ath9k driver or hostapd so I'm > sending this to both lists. ... > If I reboot my board after this, AP role works right from the start. > But if I toggle the power of my board, AP mode gets broken again. What > could cause this kind of behavior? Is there something in AR5418 > registers that is left uninitialized in AP mode in the driver or > hostapd? That's clearly something in the hardware, so hostapd is irrelevant here. > I'm using Linux kernel version 2.6.33 on powerpc platform. Hostapd > version is 0.7.3 and wpa_supplicant is 0.7.3 too. The first thing should be to test the card with the latest kernel or with compat-wireless. For Linux wireless drivers, 2.6.33 is stone age :) You can also check the card with MadWifi trunk snapshot. If that works fine, chances are that ath9k does something wrong, otherwise I would suspect the hardware. -- Regards, Pavel Roskin _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel