RX filter flags previously set for DFS radar detection were not
preserved after "ath9k: disable unnecessary PHY error reporting".
This patch ensures that the flags required for DFS support are
kept set.
Signed-off-by: Zefir Kurtisi <zefir.kurt...@neratec.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 12 ++++++++----
1 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c
b/drivers/net/wireless/ath/ath9k/recv.c
index 592ae5b..02c8dc3 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -417,6 +417,7 @@ void ath_rx_cleanup(struct ath_softc *sc)
* Calculate the receive filter according to the
* operating mode and state:
*
+ * o preserve DFS (phyerror, phyradar)
* o always accept unicast, broadcast, and multicast traffic
* o maintain current state of phy error reception (the hal
* may enable phy error frames for noise immunity work)
@@ -434,10 +435,15 @@ void ath_rx_cleanup(struct ath_softc *sc)
u32 ath_calcrxfilter(struct ath_softc *sc)
{
+ const u32 rx_filter_preserve =
+ (ATH9K_RX_FILTER_PHYERR | ATH9K_RX_FILTER_PHYRADAR);
+ const u32 rx_filter_accept =
+ (ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST
+ | ATH9K_RX_FILTER_MCAST);
u32 rfilt;
- rfilt = ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST
- | ATH9K_RX_FILTER_MCAST;
+ rfilt = (ath9k_hw_getrxfilter(sc->sc_ah) & rx_filter_preserve);
+ rfilt |= rx_filter_accept;
if (sc->rx.rxfilter & FIF_PROBE_REQ)
rfilt |= ATH9K_RX_FILTER_PROBEREQ;
@@ -475,8 +481,6 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
}
return rfilt;
-
-#undef RX_FILTER_PRESERVE
}
int ath_startrecv(struct ath_softc *sc)
--
1.7.4.1
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
