On Wed, Mar 7, 2012 at 3:11 PM, Mohammed Shafi <shafi.wirel...@gmail.com> wrote: > Hi Matt, > >> yes, those are working to me now, but see the file "regval", it is >> allowed to be written. I tried to echo a value to it, and cat it, it >> seems not work right to me. :( >> >> You may try to echo "0x00000c45" > regval when the regval is >> "0x00000c55". Then cat regval again, see if it changed to >> "0x00000c45". > > yes, i will quickly take a look at this. thanks for reporting.
i think even though we change the regvalue, hardware will immediately updates with GPIO pins status in the register. you can just play with the rx filter register, putting 0 in that register should filter all frames. at regidx 0x0000803c echo 0 to it hope it should completely filter all frames coming to your chip after some time it will be properly updated (pls see ath9k_hw_setrxfilter) via driver ath_prepare_reset -> ath_stoprecv -> ath9k_hw_setrxfilter that can be called by chip reset path, or mac80211 call back we can play with some register that completely has our control > > -- > thanks, > shafi -- thanks, shafi _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
