From: Mohammed Shafi Shajakhan <moham...@qca.qualcomm.com>
add a new file wow.c which takes care of the hardware code
for WoW.
*program the descriptors and data words to periodically
send Keep Alive Frames.
*program the user defined patterns/masks and pattern length
in the hardware registers.
*'ath9k_hw_wow_enable' is called during the drivers suspend
callback which takes care of the following
- tracking wow event mask (to suppress spurious
wow events)
- properly configure suspend/resume WAR registers
- configure PCIE PM control register
- configure MAC WoW registers and their timeouts
- enabling wow configuration like magic packet,
user patterns based on users configuration
- configuring timeouts for KAL, beacon miss,
aifs, slot time, backoff
- create Keep Alive Pattern ('KAL')
*'ath9k_hw_wow_wakeup' is called during the drivers resume
callback which takes care of the following
- primary task is to find the reason for wakeup
from the wow status register
- configure/restore AR_PCIE_PM_CTRL register
- clear all WoW events
- configure/restore suspend/resume WAR registers
Signed-off-by: Luis R. Rodriguez <mcg...@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <moham...@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/Makefile | 1 +
drivers/net/wireless/ath/ath9k/hw.h | 31 ++
drivers/net/wireless/ath/ath9k/wow.c | 554 +++++++++++++++++++++++++++++++
3 files changed, 586 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/wow.c
diff --git a/drivers/net/wireless/ath/ath9k/Makefile
b/drivers/net/wireless/ath/ath9k/Makefile
index 9c41232..2ad8f94 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -17,6 +17,7 @@ ath9k-$(CONFIG_ATH9K_DFS_CERTIFIED) += \
dfs.o \
dfs_pattern_detector.o \
dfs_pri_detector.o
+ath9k-$(CONFIG_PM_SLEEP) += wow.o
obj-$(CONFIG_ATH9K) += ath9k.o
diff --git a/drivers/net/wireless/ath/ath9k/hw.h
b/drivers/net/wireless/ath/ath9k/hw.h
index 2a20216..8e417c1 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1110,6 +1110,37 @@ ath9k_hw_get_btcoex_scheme(struct ath_hw *ah)
}
#endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */
+
+#ifdef CONFIG_PM_SLEEP
+const char *ath9k_hw_wow_event_to_string(u32 wow_event);
+void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
+ u8 *user_mask, int pattern_count,
+ int pattern_len);
+u32 ath9k_hw_wow_wakeup(struct ath_hw *ah);
+void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable);
+#else
+static inline const char *ath9k_hw_wow_event_to_string(u32 wow_event)
+{
+ return NULL;
+}
+static inline void ath9k_hw_wow_apply_pattern(struct ath_hw *ah,
+ u8 *user_pattern, u8 *user_mask,
+ int pattern_count,
+ int pattern_len)
+{
+ return;
+}
+static inline u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
+{
+ return 0;
+}
+static inline void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
+{
+}
+#endif
+
+
+
#define ATH9K_CLOCK_RATE_CCK 22
#define ATH9K_CLOCK_RATE_5GHZ_OFDM 40
#define ATH9K_CLOCK_RATE_2GHZ_OFDM 44
diff --git a/drivers/net/wireless/ath/ath9k/wow.c
b/drivers/net/wireless/ath/ath9k/wow.c
new file mode 100644
index 0000000..eaaedbb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -0,0 +1,554 @@
+
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/export.h>
+#include "ath9k.h"
+#include "reg.h"
+#include "hw-ops.h"
+
+const char *ath9k_hw_wow_event_to_string(u32 wow_event)
+{
+ if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
+ return " Magic pattern ";
+ if (wow_event & AH_WOW_USER_PATTERN_EN)
+ return " User pattern ";
+ if (wow_event & AH_WOW_LINK_CHANGE)
+ return " Link change ";
+ if (wow_event & AH_WOW_BEACON_MISS)
+ return " Beacon reason ";
+
+ return " unknown reason ";
+}
+EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
+
+static void ath9k_hw_config_serdes_wow_sleep(struct ath_hw *ah)
+{
+ int i;
+
+ for (i = 0; i < ah->iniPcieSerdesWow.ia_rows; i++)
+ REG_WRITE(ah, INI_RA(&ah->iniPcieSerdesWow, i, 0),
+ INI_RA(&ah->iniPcieSerdesWow, i, 1));
+
+ udelay(1000);
+}
+
+static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+
+ /* set rx disable bit */
+ REG_WRITE(ah, AR_CR, AR_CR_RXD);
+
+ if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
+ ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x
AR_DIAG_SW=0x%08x\n",
+ REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
+ return;
+ } else {
+ if (!AR_SREV_9300_20_OR_LATER(ah))
+ REG_WRITE(ah, AR_RXDP, 0x0);
+ }
+
+ /* AR9280 WoW has sleep issue, do not set it to sleep */
+ if (AR_SREV_9280_20(ah))
+ return;
+
+ REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
+}
+
+#define KAL_FRAME_LEN 28
+#define KAL_FRAME_TYPE 0x2 /* data frame */
+#define KAL_FRAME_SUB_TYPE 0x4 /* null data frame */
+#define KAL_DURATION_ID 0x3d
+#define KAL_NUM_DATA_WORDS 6
+#define KAL_NUM_DESC_WORDS 12
+
+static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 frame_len = KAL_FRAME_LEN;
+ u32 tpc = MAX_RATE_POWER;
+ u32 antenna_mode = 1;
+ u32 transmit_rate;
+ u32 frame_type = KAL_FRAME_TYPE; /* frame type -> data */
+ u32 sub_type = KAL_FRAME_SUB_TYPE; /* subtype -> NULL data */
+ u32 to_ds = 1;
+ u32 duration_id = KAL_DURATION_ID;
+ u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
+ u32 ctl[13] = {0};
+ u32 data_word[KAL_NUM_DATA_WORDS];
+ u8 i;
+ u32 wow_ka_data_word0;
+
+ memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
+ memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);
+
+ if (ah->curchan->channelFlags & CHANNEL_CCK)
+ transmit_rate = 0x1b; /* CCK_1M hardware value for this rate */
+ else
+ transmit_rate = 0xb; /* OFDM_6M hardware value for this rate */
+
+ /* set the transmit buffer */
+ ctl[0] = (frame_len | (tpc << 16));
+
+ if (!(AR_SREV_9300_20_OR_LATER(ah)))
+ ctl[0] += (antenna_mode << 25);
+
+ ctl[1] = 0;
+ ctl[3] = transmit_rate;
+ ctl[4] = 0;
+ ctl[7] = (ah->txchainmask) << 2;
+
+ if (AR_SREV_9300_20_OR_LATER(ah))
+ ctl[2] = 0xf << 16; /* tx_tries 0 */
+ else
+ ctl[2] = 0x7 << 16; /* tx_tries 0 */
+
+
+ for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+ /* for AR9300 family 13 descriptor words */
+ if (AR_SREV_9300_20_OR_LATER(ah))
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+ data_word[0] = (frame_type << 2) | (sub_type << 4) |
+ (to_ds << 8) | (duration_id << 16);
+ data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+ (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+ data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
+ (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+ data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
+ (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
+ data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+ (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+ data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+
+ if (AR_SREV_9462_20_OR_LATER(ah)) {
+ /* AR9462 2.0 has an extra descriptor word (time based
+ * discard) compared to other chips */
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
+ wow_ka_data_word0 = AR_WOW_TXBUF(13);
+ } else {
+ wow_ka_data_word0 = AR_WOW_TXBUF(12);
+ }
+
+ for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
+ REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);
+
+}
+
+void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
+ u8 *user_mask, int pattern_count,
+ int pattern_len)
+{
+ int i;
+ u32 pattern_val, mask_val;
+ u32 set, clr;
+
+ /* FIXME: should check count by querying the hardware capability */
+ if (pattern_count >= MAX_NUM_PATTERN)
+ return;
+
+ REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+
+ /* set the registers for pattern */
+ for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
+ memcpy(&pattern_val, user_pattern, 4);
+ REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
+ pattern_val);
+ user_pattern += 4;
+ }
+
+ /* set the registers for mask */
+ for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
+ memcpy(&mask_val, user_mask, 4);
+ REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
+ user_mask += 4;
+ }
+
+ /* set the pattern length to be matched
+ *
+ * AR_WOW_LENGTH1_REG1
+ * bit 31:24 pattern 0 length
+ * bit 23:16 pattern 1 length
+ * bit 15:8 pattern 2 length
+ * bit 7:0 pattern 3 length
+ *
+ * AR_WOW_LENGTH1_REG2
+ * bit 31:24 pattern 4 length
+ * bit 23:16 pattern 5 length
+ * bit 15:8 pattern 6 length
+ * bit 7:0 pattern 7 length
+ *
+ * the below logic writes out the new
+ * pattern length for the corresponding
+ * pattern_count, while masking out the
+ * other fields
+ */
+
+ ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+
+ if (!AR_SREV_9285_12_OR_LATER(ah))
+ return;
+
+ if (pattern_count < 4) {
+ /* Pattern 0-3 uses AR_WOW_LENGTH1 register */
+ set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+ AR_WOW_LEN1_SHIFT(pattern_count);
+ clr = AR_WOW_LENGTH1_MASK(pattern_count);
+ REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
+ } else {
+ /* Pattern 4-7 uses AR_WOW_LENGTH2 register */
+ set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+ AR_WOW_LEN2_SHIFT(pattern_count);
+ clr = AR_WOW_LENGTH2_MASK(pattern_count);
+ REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
+ }
+
+}
+EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
+
+u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
+{
+ u32 wow_status = 0;
+ u32 val = 0, rval;
+ u32 set, clr;
+
+ /*
+ * read the WoW status register to know
+ * the wakeup reason
+ */
+ rval = REG_READ(ah, AR_WOW_PATTERN);
+ val = AR_WOW_STATUS(rval);
+
+ /*
+ * mask only the WoW events that we have enabled. Sometimes
+ * we have spurious WoW events from the AR_WOW_PATTERN
+ * register. This mask will clean it up.
+ */
+
+ val &= ah->wow_event_mask;
+
+ if (val) {
+
+ if (val & AR_WOW_MAGIC_PAT_FOUND)
+ wow_status |= AH_WOW_MAGIC_PATTERN_EN;
+
+ if (AR_WOW_PATTERN_FOUND(val))
+ wow_status |= AH_WOW_USER_PATTERN_EN;
+
+ if (val & AR_WOW_KEEP_ALIVE_FAIL)
+ wow_status |= AH_WOW_LINK_CHANGE;
+
+ if (val & AR_WOW_BEACON_FAIL)
+ wow_status |= AH_WOW_BEACON_MISS;
+
+ }
+
+ /*
+ * set and clear WOW_PME_CLEAR registers for the chip to
+ * generate next wow signal.
+ * disable D3 before accessing other registers ?
+ */
+
+ set = AR_PMCTRL_WOW_PME_CLR;
+ clr = AR_PMCTRL_PWR_STATE_D1D3;
+ /* do we need to check the bit value 0x01000000 (7-10) ?? */
+ REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+
+ /*
+ * clear all events
+ */
+ REG_WRITE(ah, AR_WOW_PATTERN,
+ AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
+
+ /*
+ * tie reset register for AR9002 family of chipsets
+ * NB: not tieing it back might have some repurcussions.
+ */
+
+ if (!AR_SREV_9300_20_OR_LATER(ah)) {
+ set = AR_WA_UNTIE_RESET_EN |
+ AR_WA_POR_SHORT |
+ AR_WA_RESET_EN;
+ REG_SET_BIT(ah, AR_WA, set);
+ }
+
+
+ /*
+ * restore the beacon threshold to init value
+ */
+ REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
+
+ /*
+ * Restore the way the PCI-E reset, Power-On-Reset, external
+ * PCIE_POR_SHORT pins are tied to its original value.
+ * Previously just before WoW sleep, we untie the PCI-E
+ * reset to our Chip's Power On Reset so that any PCI-E
+ * reset from the bus will not reset our chip
+ */
+
+ if (AR_SREV_9280_20_OR_LATER(ah) && ah->is_pciexpress)
+ ath9k_hw_configpcipowersave(ah, false);
+
+ ah->wow_event_mask = 0;
+
+ return wow_status;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
+
+/* delay of 4 ms between two keep alive frames */
+#define KA_DELAY 4
+#define KAL_TIMEOUT 900
+void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
+{
+ u32 wow_event_mask;
+ u32 set, clr;
+
+ /*
+ * wow_event_mask is a mask to the AR_WOW_PATTERN register to
+ * indicate which WoW events we have enabled. The WoW events
+ * are from the 'pattern_enable' in this function and
+ * 'pattern_count' of ath9k_hw_wow_apply_pattern()
+ */
+
+ wow_event_mask = ah->wow_event_mask;
+
+ /*
+ * Untie Power-on-Reset from the PCI-E-Reset. When we are in
+ * WOW sleep, we do want the Reset from the PCI-E to disturb
+ * our hw state
+ */
+
+ if (ah->is_pciexpress) {
+
+ /*
+ * we need to untie the internal POR (power-on-reset)
+ * to the external PCI-E reset. We also need to tie
+ * the PCI-E Phy reset to the PCI-E reset.
+ */
+
+ if (AR_SREV_9300_20_OR_LATER(ah)) {
+ set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
+ clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
+ REG_RMW(ah, AR_WA, set, clr);
+ } else {
+ if (AR_SREV_9285(ah) || AR_SREV_9287(ah))
+ set = AR9285_WA_DEFAULT;
+ else
+ set = AR9280_WA_DEFAULT;
+
+ /*
+ * In AR9280 and AR9285, bit 14 in WA register
+ * (disable L1) should only be set when device
+ * enters D3 state and be cleared when device
+ * comes back to D0
+ */
+
+ if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
+ set = set | AR_WA_D3_L1_DISABLE;
+
+ clr = AR_WA_UNTIE_RESET_EN;
+ set = set | AR_WA_RESET_EN | AR_WA_POR_SHORT;
+ REG_RMW(ah, AR_WA, set, clr);
+
+ /*
+ * for WoW sleep, we reprogram the SerDes so that the
+ * PLL and CLK REQ are both enabled. This uses more
+ * power but otherwise WoW sleep is unstable and the
+ * chip may disappear.
+ */
+
+ if (AR_SREV_9285_12_OR_LATER(ah))
+ ath9k_hw_config_serdes_wow_sleep(ah);
+
+ }
+ }
+
+ /*
+ * set the power states appropriately and enable PME
+ */
+ set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
+ AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
+
+ /*
+ * set and clear WOW_PME_CLEAR registers for the chip
+ * to generate next wow signal.
+ */
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+ clr = AR_PMCTRL_WOW_PME_CLR;
+ REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+ /*
+ * Setup for:
+ * - beacon misses
+ * - magic pattern
+ * - keep alive timeout
+ * - pattern matching
+ */
+
+ /*
+ * Program default values for pattern backoff, aifs/slot/KAL count,
+ * beacon miss timeout, KAL timeout, etc.
+ */
+
+ set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
+ REG_SET_BIT(ah, AR_WOW_PATTERN, set);
+
+ set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
+ AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
+ AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
+ REG_SET_BIT(ah, AR_WOW_COUNT, set);
+
+ if (pattern_enable & AH_WOW_BEACON_MISS)
+ set = AR_WOW_BEACON_TIMO;
+ /* We are not using beacon miss, program a large value */
+ else
+ set = AR_WOW_BEACON_TIMO_MAX;
+
+ REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
+
+ /*
+ * Keep alive timo in ms except AR9280
+ */
+ if (!pattern_enable || AR_SREV_9280(ah))
+ set = AR_WOW_KEEP_ALIVE_NEVER;
+ else
+ set = KAL_TIMEOUT * 32;
+
+ REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
+
+ /*
+ * Keep alive delay in us. based on 'power on clock',
+ * therefore in usec
+ */
+ set = KA_DELAY * 1000;
+ REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
+
+ /*
+ * Create keep alive pattern to respond to beacons
+ */
+ ath9k_wow_create_keep_alive_pattern(ah);
+
+ /*
+ * Configure MAC WoW Registers
+ */
+
+ set = 0;
+ /* Send keep alive timeouts anyway */
+ clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
+
+ if (pattern_enable & AH_WOW_LINK_CHANGE) {
+ clr |= AR_WOW_KEEP_ALIVE_FAIL_DIS;
+ wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
+ } else {
+ set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+ }
+
+ REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
+
+
+ /*
+ * we are relying on a bmiss failure. ensure we have
+ * enough threshold to prevent false positives
+ */
+ REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
+ AR_WOW_BMISSTHRESHOLD);
+
+ set = clr = 0;
+
+ if (pattern_enable & AH_WOW_BEACON_MISS) {
+ set = AR_WOW_BEACON_FAIL_EN;
+ wow_event_mask |= AR_WOW_BEACON_FAIL;
+ } else {
+ clr = AR_WOW_BEACON_FAIL_EN;
+ }
+
+ REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
+
+ /*
+ * Enable the magic packet registers
+ */
+ set = clr = 0;
+ if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
+ set = AR_WOW_MAGIC_EN;
+ wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
+ } else {
+ clr = AR_WOW_MAGIC_EN;
+ }
+ set |= AR_WOW_MAC_INTR_EN;
+ REG_RMW(ah, AR_WOW_PATTERN, set, clr);
+
+ /*
+ * For AR9285 and later version of chipsets
+ * enable WoW pattern match for packets less
+ * than 256 bytes for all patterns
+ */
+ if (AR_SREV_9285_12_OR_LATER(ah))
+ REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
+ AR_WOW_PATTERN_SUPPORTED);
+
+ /*
+ * Set the power states appropriately and enable PME
+ */
+ clr = 0;
+ set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
+ AR_PMCTRL_PWR_PM_CTRL_ENA;
+ /*
+ * This is needed for AR9300 chipsets to wake-up
+ * the host.
+ */
+ if (AR_SREV_9300_20_OR_LATER(ah))
+ clr = AR_PCIE_PM_CTRL_ENA;
+
+ REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+
+ if (AR_SREV_9462(ah)) {
+ /*
+ * this is needed to prevent the chip waking up
+ * the host within 3-4 seconds with certain
+ * platform/BIOS. the fix it to enable
+ * D1 & D3 to match original definition and
+ * also match the OTP value. Anyway this
+ * is more related to SW WOW.
+ */
+ clr = AR_PMCTRL_PWR_STATE_D1D3;
+ REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+ set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+ }
+
+
+
+ REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
+
+ if (AR_SREV_9300_20_OR_LATER(ah)) {
+ /* to bring down WOW power low margin */
+ set = BIT(13);
+ REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
+ /* HW WoW */
+ clr = BIT(5);
+ REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
+ }
+
+ ath9k_hw_set_powermode_wow_sleep(ah);
+ ah->wow_event_mask = wow_event_mask;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_enable);
--
1.7.0.4
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
