From: Mohammed Shafi Shajakhan <moham...@qca.qualcomm.com> add a new file wow.c which takes care of the hardware code for WoW.
*program the descriptors and data words to periodically send Keep Alive Frames. *program the user defined patterns/masks and pattern length in the hardware registers. *'ath9k_hw_wow_enable' is called during the drivers suspend callback which takes care of the following - tracking wow event mask (to suppress spurious wow events) - properly configure suspend/resume WAR registers - configure PCIE PM control register - configure MAC WoW registers and their timeouts - enabling wow configuration like magic packet, user patterns based on users configuration - configuring timeouts for KAL, beacon miss, aifs, slot time, backoff - create Keep Alive Pattern ('KAL') *'ath9k_hw_wow_wakeup' is called during the drivers resume callback which takes care of the following - primary task is to find the reason for wakeup from the wow status register - configure/restore AR_PCIE_PM_CTRL register - clear all WoW events - configure/restore suspend/resume WAR registers Cc: Senthil Balasubramanian <senth...@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmano...@qca.qualcomm.com> Cc: vadi...@qca.qualcomm.com Tested-by: Mohammed Shafi Shajakhan <moham...@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcg...@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <moham...@qca.qualcomm.com> --- drivers/net/wireless/ath/ath9k/Makefile | 1 + drivers/net/wireless/ath/ath9k/hw.h | 31 ++ drivers/net/wireless/ath/ath9k/wow.c | 559 +++++++++++++++++++++++++++++++ 3 files changed, 591 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/ath/ath9k/wow.c diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile index 9c41232..2ad8f94 100644 --- a/drivers/net/wireless/ath/ath9k/Makefile +++ b/drivers/net/wireless/ath/ath9k/Makefile @@ -17,6 +17,7 @@ ath9k-$(CONFIG_ATH9K_DFS_CERTIFIED) += \ dfs.o \ dfs_pattern_detector.o \ dfs_pri_detector.o +ath9k-$(CONFIG_PM_SLEEP) += wow.o obj-$(CONFIG_ATH9K) += ath9k.o diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 2a20216..8e417c1 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -1110,6 +1110,37 @@ ath9k_hw_get_btcoex_scheme(struct ath_hw *ah) } #endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */ + +#ifdef CONFIG_PM_SLEEP +const char *ath9k_hw_wow_event_to_string(u32 wow_event); +void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern, + u8 *user_mask, int pattern_count, + int pattern_len); +u32 ath9k_hw_wow_wakeup(struct ath_hw *ah); +void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable); +#else +static inline const char *ath9k_hw_wow_event_to_string(u32 wow_event) +{ + return NULL; +} +static inline void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, + u8 *user_pattern, u8 *user_mask, + int pattern_count, + int pattern_len) +{ + return; +} +static inline u32 ath9k_hw_wow_wakeup(struct ath_hw *ah) +{ + return 0; +} +static inline void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) +{ +} +#endif + + + #define ATH9K_CLOCK_RATE_CCK 22 #define ATH9K_CLOCK_RATE_5GHZ_OFDM 40 #define ATH9K_CLOCK_RATE_2GHZ_OFDM 44 diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c new file mode 100644 index 0000000..66a7a74 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/wow.c @@ -0,0 +1,559 @@ + +/* + * Copyright (c) 2008-2011 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/export.h> +#include "ath9k.h" +#include "reg.h" +#include "hw-ops.h" + +const char *ath9k_hw_wow_event_to_string(u32 wow_event) +{ + if (wow_event & AH_WOW_MAGIC_PATTERN_EN) + return " Magic pattern "; + if (wow_event & AH_WOW_USER_PATTERN_EN) + return " User pattern "; + if (wow_event & AH_WOW_LINK_CHANGE) + return " Link change "; + if (wow_event & AH_WOW_BEACON_MISS) + return " Beacon reason "; + + return " unknown reason "; +} +EXPORT_SYMBOL(ath9k_hw_wow_event_to_string); + +static void ath9k_hw_config_serdes_wow_sleep(struct ath_hw *ah) +{ + int i; + + for (i = 0; i < ah->iniPcieSerdesWow.ia_rows; i++) + REG_WRITE(ah, INI_RA(&ah->iniPcieSerdesWow, i, 0), + INI_RA(&ah->iniPcieSerdesWow, i, 1)); + + udelay(1000); +} + +static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + + REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV); + + /* set rx disable bit */ + REG_WRITE(ah, AR_CR, AR_CR_RXD); + + if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) { + ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n", + REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW)); + return; + } else { + if (!AR_SREV_9300_20_OR_LATER(ah)) + REG_WRITE(ah, AR_RXDP, 0x0); + } + + /* AR9280 WoW has sleep issue, do not set it to sleep */ + if (AR_SREV_9280_20(ah)) + return; + + REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT); +} + +#define KAL_FRAME_LEN 28 +#define KAL_FRAME_TYPE 0x2 /* data frame */ +#define KAL_FRAME_SUB_TYPE 0x4 /* null data frame */ +#define KAL_DURATION_ID 0x3d +#define KAL_NUM_DATA_WORDS 6 +#define KAL_NUM_DESC_WORDS 12 + +static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + u32 frame_len = KAL_FRAME_LEN; + u32 tpc = MAX_RATE_POWER; + u32 antenna_mode = 1; + u32 transmit_rate; + u32 frame_type = KAL_FRAME_TYPE; /* frame type -> data */ + u32 sub_type = KAL_FRAME_SUB_TYPE; /* subtype -> NULL data */ + u32 to_ds = 1; + u32 duration_id = KAL_DURATION_ID; + u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN]; + u32 ctl[13] = {0}; + u32 data_word[KAL_NUM_DATA_WORDS]; + u8 i; + u32 wow_ka_data_word0; + + memcpy(sta_mac_addr, common->macaddr, ETH_ALEN); + memcpy(ap_mac_addr, common->curbssid, ETH_ALEN); + + if (ah->curchan->channelFlags & CHANNEL_CCK) + transmit_rate = 0x1b; /* CCK_1M hardware value for this rate */ + else + transmit_rate = 0xb; /* OFDM_6M hardware value for this rate */ + + /* set the transmit buffer */ + ctl[0] = (frame_len | (tpc << 16)); + + if (!(AR_SREV_9300_20_OR_LATER(ah))) + ctl[0] += (antenna_mode << 25); + + ctl[1] = 0; + ctl[3] = transmit_rate; + ctl[4] = 0; + ctl[7] = (ah->txchainmask) << 2; + + if (AR_SREV_9300_20_OR_LATER(ah)) + ctl[2] = 0xf << 16; /* tx_tries 0 */ + else + ctl[2] = 0x7 << 16; /* tx_tries 0 */ + + + for (i = 0; i < KAL_NUM_DESC_WORDS; i++) + REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]); + + /* for AR9300 family 13 descriptor words */ + if (AR_SREV_9300_20_OR_LATER(ah)) + REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]); + + data_word[0] = (frame_type << 2) | (sub_type << 4) | + (to_ds << 8) | (duration_id << 16); + data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) | + (ap_mac_addr[1] << 8) | (ap_mac_addr[0]); + data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) | + (ap_mac_addr[5] << 8) | (ap_mac_addr[4]); + data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) | + (sta_mac_addr[3] << 8) | (sta_mac_addr[2]); + data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) | + (ap_mac_addr[1] << 8) | (ap_mac_addr[0]); + data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]); + + if (AR_SREV_9462_20_OR_LATER(ah)) { + /* AR9462 2.0 has an extra descriptor word (time based + * discard) compared to other chips */ + REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0); + wow_ka_data_word0 = AR_WOW_TXBUF(13); + } else { + wow_ka_data_word0 = AR_WOW_TXBUF(12); + } + + for (i = 0; i < KAL_NUM_DATA_WORDS; i++) + REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]); + +} + +void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern, + u8 *user_mask, int pattern_count, + int pattern_len) +{ + int i; + u32 pattern_val, mask_val; + u32 set, clr; + + /* FIXME: should check count by querying the hardware capability */ + if (pattern_count >= MAX_NUM_PATTERN) + return; + + REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count)); + + /* set the registers for pattern */ + for (i = 0; i < MAX_PATTERN_SIZE; i += 4) { + memcpy(&pattern_val, user_pattern, 4); + REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i), + pattern_val); + user_pattern += 4; + } + + /* set the registers for mask */ + for (i = 0; i < MAX_PATTERN_SIZE; i += 4) { + memcpy(&mask_val, user_mask, 4); + REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val); + user_mask += 4; + } + + /* set the pattern length to be matched + * + * AR_WOW_LENGTH1_REG1 + * bit 31:24 pattern 0 length + * bit 23:16 pattern 1 length + * bit 15:8 pattern 2 length + * bit 7:0 pattern 3 length + * + * AR_WOW_LENGTH1_REG2 + * bit 31:24 pattern 4 length + * bit 23:16 pattern 5 length + * bit 15:8 pattern 6 length + * bit 7:0 pattern 7 length + * + * the below logic writes out the new + * pattern length for the corresponding + * pattern_count, while masking out the + * other fields + */ + + ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT); + + if (!AR_SREV_9285_12_OR_LATER(ah)) + return; + + if (pattern_count < 4) { + /* Pattern 0-3 uses AR_WOW_LENGTH1 register */ + set = (pattern_len & AR_WOW_LENGTH_MAX) << + AR_WOW_LEN1_SHIFT(pattern_count); + clr = AR_WOW_LENGTH1_MASK(pattern_count); + REG_RMW(ah, AR_WOW_LENGTH1, set, clr); + } else { + /* Pattern 4-7 uses AR_WOW_LENGTH2 register */ + set = (pattern_len & AR_WOW_LENGTH_MAX) << + AR_WOW_LEN2_SHIFT(pattern_count); + clr = AR_WOW_LENGTH2_MASK(pattern_count); + REG_RMW(ah, AR_WOW_LENGTH2, set, clr); + } + +} +EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern); + +u32 ath9k_hw_wow_wakeup(struct ath_hw *ah) +{ + u32 wow_status = 0; + u32 val = 0, rval; + u32 set, clr; + + /* + * read the WoW status register to know + * the wakeup reason + */ + rval = REG_READ(ah, AR_WOW_PATTERN); + val = AR_WOW_STATUS(rval); + + /* + * mask only the WoW events that we have enabled. Sometimes + * we have spurious WoW events from the AR_WOW_PATTERN + * register. This mask will clean it up. + */ + + val &= ah->wow_event_mask; + + if (val) { + + if (val & AR_WOW_MAGIC_PAT_FOUND) + wow_status |= AH_WOW_MAGIC_PATTERN_EN; + + if (AR_WOW_PATTERN_FOUND(val)) + wow_status |= AH_WOW_USER_PATTERN_EN; + + if (val & AR_WOW_KEEP_ALIVE_FAIL) + wow_status |= AH_WOW_LINK_CHANGE; + + if (val & AR_WOW_BEACON_FAIL) + wow_status |= AH_WOW_BEACON_MISS; + + } + + /* + * set and clear WOW_PME_CLEAR registers for the chip to + * generate next wow signal. + * disable D3 before accessing other registers ? + */ + + set = AR_PMCTRL_WOW_PME_CLR; + clr = AR_PMCTRL_PWR_STATE_D1D3; + /* do we need to check the bit value 0x01000000 (7-10) ?? */ + REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr); + + /* + * clear all events + */ + REG_WRITE(ah, AR_WOW_PATTERN, + AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN))); + + /* + * tie reset register for AR9002 family of chipsets + * NB: not tieing it back might have some repurcussions. + */ + + if (!AR_SREV_9300_20_OR_LATER(ah)) { + set = AR_WA_UNTIE_RESET_EN | + AR_WA_POR_SHORT | + AR_WA_RESET_EN; + REG_SET_BIT(ah, AR_WA, set); + } + + + /* + * restore the beacon threshold to init value + */ + REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR); + + /* + * Restore the way the PCI-E reset, Power-On-Reset, external + * PCIE_POR_SHORT pins are tied to its original value. + * Previously just before WoW sleep, we untie the PCI-E + * reset to our Chip's Power On Reset so that any PCI-E + * reset from the bus will not reset our chip + */ + + if (AR_SREV_9280_20_OR_LATER(ah) && ah->is_pciexpress) + ath9k_hw_configpcipowersave(ah, false); + + ah->wow_event_mask = 0; + + return wow_status; +} +EXPORT_SYMBOL(ath9k_hw_wow_wakeup); + +/* delay of 4 ms between two keep alive frames */ +#define KA_DELAY 4 +#define KAL_TIMEOUT 900 +void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) +{ + u32 wow_event_mask; + u32 set, clr; + + /* + * wow_event_mask is a mask to the AR_WOW_PATTERN register to + * indicate which WoW events we have enabled. The WoW events + * are from the 'pattern_enable' in this function and + * 'pattern_count' of ath9k_hw_wow_apply_pattern() + */ + + wow_event_mask = ah->wow_event_mask; + + /* + * Untie Power-on-Reset from the PCI-E-Reset. When we are in + * WOW sleep, we do want the Reset from the PCI-E to disturb + * our hw state + */ + + if (ah->is_pciexpress) { + + /* + * we need to untie the internal POR (power-on-reset) + * to the external PCI-E reset. We also need to tie + * the PCI-E Phy reset to the PCI-E reset. + */ + + if (AR_SREV_9300_20_OR_LATER(ah)) { + set = AR_WA_RESET_EN | AR_WA_POR_SHORT; + clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE; + REG_RMW(ah, AR_WA, set, clr); + } else { + if (AR_SREV_9285(ah) || AR_SREV_9287(ah)) + set = AR9285_WA_DEFAULT; + else + set = AR9280_WA_DEFAULT; + + /* + * In AR9280 and AR9285, bit 14 in WA register + * (disable L1) should only be set when device + * enters D3 state and be cleared when device + * comes back to D0 + */ + + if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE) + set = set | AR_WA_D3_L1_DISABLE; + + clr = AR_WA_UNTIE_RESET_EN; + set = set | AR_WA_RESET_EN | AR_WA_POR_SHORT; + REG_RMW(ah, AR_WA, set, clr); + + /* + * for WoW sleep, we reprogram the SerDes so that the + * PLL and CLK REQ are both enabled. This uses more + * power but otherwise WoW sleep is unstable and the + * chip may disappear. + */ + + if (AR_SREV_9285_12_OR_LATER(ah)) + ath9k_hw_config_serdes_wow_sleep(ah); + + } + } + + /* + * set the power states appropriately and enable PME + */ + set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA | + AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR; + + /* + * set and clear WOW_PME_CLEAR registers for the chip + * to generate next wow signal. + */ + REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set); + clr = AR_PMCTRL_WOW_PME_CLR; + REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr); + + /* + * Setup for: + * - beacon misses + * - magic pattern + * - keep alive timeout + * - pattern matching + */ + + /* + * Program default values for pattern backoff, aifs/slot/KAL count, + * beacon miss timeout, KAL timeout, etc. + */ + + set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF); + REG_SET_BIT(ah, AR_WOW_PATTERN, set); + + set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) | + AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) | + AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT); + REG_SET_BIT(ah, AR_WOW_COUNT, set); + + if (pattern_enable & AH_WOW_BEACON_MISS) + set = AR_WOW_BEACON_TIMO; + /* We are not using beacon miss, program a large value */ + else + set = AR_WOW_BEACON_TIMO_MAX; + + REG_WRITE(ah, AR_WOW_BCN_TIMO, set); + + /* + * Keep alive timo in ms except AR9280 + */ + if (!pattern_enable || AR_SREV_9280(ah)) + set = AR_WOW_KEEP_ALIVE_NEVER; + else + set = KAL_TIMEOUT * 32; + + REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set); + + /* + * Keep alive delay in us. based on 'power on clock', + * therefore in usec + */ + set = KA_DELAY * 1000; + REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set); + + /* + * Create keep alive pattern to respond to beacons + */ + ath9k_wow_create_keep_alive_pattern(ah); + + /* + * Configure MAC WoW Registers + */ + + set = 0; + /* Send keep alive timeouts anyway */ + clr = AR_WOW_KEEP_ALIVE_AUTO_DIS; + + if (pattern_enable & AH_WOW_LINK_CHANGE) + wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL; + else + set = AR_WOW_KEEP_ALIVE_FAIL_DIS; + + /* + * FIXME: For now disable keep alive frame + * failure. This seems to sometimes trigger + * unnecessary wake up with AR9485 chipsets. + */ + set = AR_WOW_KEEP_ALIVE_FAIL_DIS; + + REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr); + + + /* + * we are relying on a bmiss failure. ensure we have + * enough threshold to prevent false positives + */ + REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR, + AR_WOW_BMISSTHRESHOLD); + + set = clr = 0; + + if (pattern_enable & AH_WOW_BEACON_MISS) { + set = AR_WOW_BEACON_FAIL_EN; + wow_event_mask |= AR_WOW_BEACON_FAIL; + } else { + clr = AR_WOW_BEACON_FAIL_EN; + } + + REG_RMW(ah, AR_WOW_BCN_EN, set, clr); + + /* + * Enable the magic packet registers + */ + set = clr = 0; + if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) { + set = AR_WOW_MAGIC_EN; + wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND; + } else { + clr = AR_WOW_MAGIC_EN; + } + set |= AR_WOW_MAC_INTR_EN; + REG_RMW(ah, AR_WOW_PATTERN, set, clr); + + /* + * For AR9285 and later version of chipsets + * enable WoW pattern match for packets less + * than 256 bytes for all patterns + */ + if (AR_SREV_9285_12_OR_LATER(ah)) + REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B, + AR_WOW_PATTERN_SUPPORTED); + + /* + * Set the power states appropriately and enable PME + */ + clr = 0; + set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN | + AR_PMCTRL_PWR_PM_CTRL_ENA; + /* + * This is needed for AR9300 chipsets to wake-up + * the host. + */ + if (AR_SREV_9300_20_OR_LATER(ah)) + clr = AR_PCIE_PM_CTRL_ENA; + + REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr); + + if (AR_SREV_9462(ah)) { + /* + * this is needed to prevent the chip waking up + * the host within 3-4 seconds with certain + * platform/BIOS. the fix it to enable + * D1 & D3 to match original definition and + * also match the OTP value. Anyway this + * is more related to SW WOW. + */ + clr = AR_PMCTRL_PWR_STATE_D1D3; + REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr); + + set = AR_PMCTRL_PWR_STATE_D1D3_REAL; + REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set); + } + + + + REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM); + + if (AR_SREV_9300_20_OR_LATER(ah)) { + /* to bring down WOW power low margin */ + set = BIT(13); + REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set); + /* HW WoW */ + clr = BIT(5); + REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr); + } + + ath9k_hw_set_powermode_wow_sleep(ah); + ah->wow_event_mask = wow_event_mask; +} +EXPORT_SYMBOL(ath9k_hw_wow_enable); -- 1.7.0.4 _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel