Hi, All: I plugged in a PICe card with ATH9580 to my test server running Ubuntu 13.10 server. I ran "iw dev" but didn't see the device interface (wlan0 or wlan1). What happened here, I though the driver for ath9k should be there in kernel 3.11 Do I have to enable the driver as described in " http://wireless.kernel.org/en/users/Drivers/ath9k";? Why it is not enabled by default? Can somebody posts a detailed step to do it? I never did "menuconfig" before so just want to make sure do it right.
Thank you! Nick Shu E-mail confidentiality. -------------------------------- This e-mail contains confidential and / or privileged information belonging to Spirent Communications plc, its affiliates and / or subsidiaries. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution and / or the taking of any action based upon reliance on the contents of this transmission is strictly forbidden. If you have received this message in error please notify the sender by return e-mail and delete it from your system. Spirent Communications plc Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, United Kingdom. Tel No. +44 (0) 1293 767676 Fax No. +44 (0) 1293 767677 Registered in England Number 470893 Registered at Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, United Kingdom. Or if within the US, Spirent Communications, 26750 Agoura Road, Calabasas, CA, 91302, USA. Tel No. 1-818-676- 2300 _______________________________________________ ath9k-devel mailing list [email protected] https://lists.ath9k.org/mailman/listinfo/ath9k-devel
