Looks like both backports-20140320 and 3.14-1 fail to compile with the error ".../backport-include/linux/compat.h:18 error: expected ';', ',' or ')' before '*' token? Could this be caused by my kernel config?
Aaron Hamilton, BSCE Logic Data Systems 115 E City Place Dr Santa Ana, CA 92705 P: 949.892.5263 Ext 201 C: 714.272.5210 www.logicdatasystems.net On Tue, Apr 15, 2014 at 12:27 PM, Aaron Hamilton <[email protected]> wrote: > Scratch that. I just checked backports-20140320 and it allows mac80211 > and ath9k_htc to come up. > > Aaron Hamilton, BSCE > Logic Data Systems > 115 E City Place Dr > Santa Ana, CA 92705 > > P: 949.892.5263 Ext 201 > C: 714.272.5210 > > www.logicdatasystems.net > > > On Tue, Apr 15, 2014 at 12:25 PM, Aaron Hamilton > <[email protected]> wrote: >> I'm currently using the latest firmware from >> https://github.com/qca/open-ath9k-htc-firmware, but it appears >> backports v3.13.2-1 and newer are missing mac80211 and ath9k_htc >> drivers. At least when I do make menuconfig, they are not available? >> >> On Mon, Apr 14, 2014 at 1:59 PM, Oleksij Rempel <[email protected]> >> wrote: >>> Am 14.04.2014 22:21, schrieb Aaron Hamilton: >>>> Tried iw wlan0 station dump and it came back with nothing. Also, we >>>> only have three devices configured at the moment to be able to >>>> associate with the AP. Also, I forgot to attach dmesg previously. >>>> I'm assuming the message "ath: phy0: FATAL Event received, resetting >>>> device" might have something to do with it? >>> >>> May be firmware related issue. >>> Please use firmware from latest git and newest wireless code. There are >>> lots of changes, including patch which will log information about FW oops. >>> >>>> On Sat, Apr 12, 2014 at 1:18 PM, Aaron Hamilton >>>> <[email protected]> wrote: >>>>> >>>>> I'm using an ath9k_htc (ZCN-722M/0cf3:9271) as an AP and after several >>>>> hours of use, client devices can no longer attach. When everything stops >>>>> working, there's no indication whatsoever in the log. >>>>> >>>>> If I restart hostapd, everything seems to work fine for a while, but then >>>>> stops working again. >>>>> >>>>> I'm currently using backports-3.12.8-1 with a 2.6.39.4 kernel and a >>>>> simple hostapd config (see attached config files). >>>>> >>>>> Am I missing something or should I be using a different version of >>>>> something? >>>>> >>>>> >>>>> _______________________________________________ >>>>> ath9k-devel mailing list >>>>> [email protected] >>>>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel >>> >>> >>> -- >>> Regards, >>> Oleksij >>> _______________________________________________ ath9k-devel mailing list [email protected] https://lists.ath9k.org/mailman/listinfo/ath9k-devel
