Hi Lorenzo, i upgraded last night a point to pint of 9kms with dynack (it’s bullets 5M) It works perfectly I have better bandwidth ! yes, about 10% better! next week, i’ll upgrade a point to multipoint with 20 STA. STA are around 6kms from the base station. Base station is a rocket 5M and CPE are Ubnt nanobridge.
Regards, Philippe Le 7 juil. 2014 à 11:31, Lorenzo Bianconi <lorenzo.biancon...@gmail.com> a écrit : > This patchset adds support for estimation of the ack timeout (dynack) in ath9k > driver. Ath9k dynack computes the ack timeout based on ack frame RX timestamp, > TX frame timestamp and frame duration. > > Ath9k dynack has been tested in indoor environment using AR9223 chipset > (running 3.15.3 kernel) configured as AP and using AR9280 chipset > (running 3.16.0-rc3) configured as STA. Ath9k dynack needs to be tested on a > long distance link in outdoor environment. > > Lorenzo Bianconi (10): > ath9k: export methods related to ack timeout estimation > ath9k: add duration field to ath_tx_status > ath9k: add dynamic ack timeout estimation > ath9k: add config for (en|dis)abling ack timeout estimation > ath9k: do not overwrite ack timeout estimation > ath9k: add sampling methods for (tx|rx) timestamp > ath9k: enable control frame reception > ath9k: add debugfs support for dynack > ath9k: disable dynack algorithm when coverage class is set > ath9k: add ath_node linked list > > drivers/net/wireless/ath/ath.h | 2 + > drivers/net/wireless/ath/ath9k/Kconfig | 7 + > drivers/net/wireless/ath/ath9k/Makefile | 3 + > drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 + > drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 + > drivers/net/wireless/ath/ath9k/ath9k.h | 3 + > drivers/net/wireless/ath/ath9k/debug.c | 82 ++++++++ > drivers/net/wireless/ath/ath9k/dynack.c | 293 ++++++++++++++++++++++++++++ > drivers/net/wireless/ath/ath9k/dynack.h | 81 ++++++++ > drivers/net/wireless/ath/ath9k/hw.c | 16 +- > drivers/net/wireless/ath/ath9k/hw.h | 7 + > drivers/net/wireless/ath/ath9k/mac.h | 1 + > drivers/net/wireless/ath/ath9k/main.c | 11 ++ > drivers/net/wireless/ath/ath9k/recv.c | 7 +- > drivers/net/wireless/ath/ath9k/xmit.c | 5 + > 15 files changed, 530 insertions(+), 4 deletions(-) > create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c > create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h > > -- > 1.9.1 > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel@lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
