This is a 10dB transmit signal gain difference, right? I can go poke someone on the PHY side and see if they have any ideas...
-a On 20 May 2016 at 12:09, Alexander Couzens <lyn...@fe80.eu> wrote: > On Fri, 20 May 2016 02:31:15 +0200 > Alexander Couzens <lyn...@fe80.eu> wrote: > >> Changing the table for 5Ghz HT20/HT40 to fix a 10dbm signal difference >> on the client side when running LEDE on the AP (TpLink CPE510) instead >> of the vendor driver. These values are taken from a TpLink CPE510 >> running the vendor firmware using a small script that retrieved the >> same registers as already defined in the tx gain table. >> >> Signed-off-by: Alexander Couzens <lyn...@fe80.eu> > > The cpe510 has a second calib data, using that ones works quite well, > because they are using 'TX Gain: 1' instead of the other table I > patches in my last mail (Tx Gain 4'). > Please only see this patch as RFC and don't merge it right away. > > Thanks, > lynxis > > -- > Alexander Couzens > > mail: lyn...@fe80.eu > jabber: lyn...@fe80.eu > mobile: +4915123277221 > gpg: 390D CF78 8BF9 AA50 4F8F F1E2 C29E 9DA6 A0DF 8604 > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel@lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
