If you have in that controller 5 drives installed, you have 3 free. bus goes 4, 8, 12 steps.
So if you put there 3 500GB disks, make new raid-5 array of them, you get 1TB usable space. -----Alkuperäinen viesti----- Lähettäjä: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Puolesta Axel Thimm Lähetetty: 17. elokuuta 2006 15:41 Vastaanottaja: Jean-Yves Avenard Kopio: ATrpms user list Aihe: Re: [ATrpms-users] atrpms kernel modules Hi, On Thu, Aug 17, 2006 at 09:42:34PM +1000, Jean-Yves Avenard wrote: > On 8/17/06, Axel Thimm <[EMAIL PROTECTED]> wrote: > > It's a RAID5 3w-9xxx setup with 5 drives in and two (or three?) slots left. > So how can I get you 2x500GB drive? Thanks! For the RAID it needs to be 250GB drives. That's because if I put 2x500GB I would need to create a new RAID volume which requires one driver to be used for RAID. If I add 250GB drives to the existing RAID every drive's capacity gets fully added since the RAID5 extras drive is already consumed. E.g. with 2x500GB one gets 500GB netto, with 2x250GB one gets the same, and with 3x250GB one gets 750GB. The drives for the RAID device are Seagate ST3250823AS (232.89 GB), it would be best to have the same type of drives. If you want to arrange for shipping anything over please contact me in PM. -- Axel.Thimm at ATrpms.net _______________________________________________ atrpms-users mailing list [email protected] http://lists.atrpms.net/mailman/listinfo/atrpms-users
