I found the source and spec files on atrpms (someone moreknowledgeable in this stuff than I showed me where to look). I will try rebuilding the rpm tonight.
If anyone has any other ideas as to why the dvb devices wouldn't load, please let me know. Thanks, TB ---- Lunch Special <[EMAIL PROTECTED]> wrote: > Hello, > I've been trying to bring up mythtv on a machine with centos5. I've > installed video4linux package, but no /dev/dvb devices are created during > boot: > > video4linux.i386 1:20070420-80.el5 > installed > video4linux-kmdl-2.6.18-8.el5.i686 1:20070420-80.el5 installed > > There are no error messages of any type in dmesg. There are no > messages containing 'dvb', 'flexcop', etc, either. 'lspci' shows the > two HD5000's installed. I've read in several places that these cards > may need firmware, but I've been unable to find specifically what > firmware file is required, if any. I have the following firmware > files in /lib/firmware: > > v4l-cx2341x-dec.fw > v4l-cx2341x-enc.fw > v4l-cx25840.fw > v4l-pvrusb2-24xxx-01.fw > v4l-pvrusb2-29xxx-01.fw > > At this point I'm guessing that the el5 version of video4linux-kmdl > was built without flexcop or b2c2 support. I'd like to rebuild > video4linux-kmdl-2.6.18-8.el5.i686. Could someone provide pointers to > the source for this package? Any tips on the build process would also > be appreciated. > > Also, if these questions are better suited for another board, please > let me know where to post. > > TIA, > TB > _______________________________________________ atrpms-users mailing list [email protected] http://lists.atrpms.net/mailman/listinfo/atrpms-users
