As an additional data point, I have seen the exact same issue since I went to F10. The LED on the IR emitter blinks, but not channel change.
Jim Steven wrote: > Well thanks for the quick response. What's happening is without the kmdl > when I try to run the change_channel.sh script. The light on the serial ir > will blink but no ir emits and the channel will not change. All the other > stuff works fine, aka lirc in mythtv is working, perfectly fine. However the > lirc_serial is not. I have done a depmod -a and a modprobe lirc_serial and > that does not complain but it will not change the channel. If I roll back to > my old kernel 2.6.27.5-41.fc9 with the lirc-kmdl everything works fine and > lirc_serial functions and changes the channel? Thanks again for the quick > response :) > > -----Original Message----- > From: Axel Thimm [mailto:[email protected]] > Sent: Thursday, February 05, 2009 11:09 AM > To: Steven > Cc: Jarod Wilson; [email protected] > Subject: Re: Problems with lirc-kmdl / lirc_serial for kernel > > On Thu, Feb 05, 2009 at 02:57:50AM -0700, Steven wrote: > >> lirc-kmdl-2.6.27.12-78.2.8.fc9-0.8.4a-81.fc9.i686 >> >> >> >> I Need helping finding out out where this kmdl is at? I have searched for >> > a > >> src rpm with no luck :( >> >> I am using lirc_serial and it will not run properly without it :-( >> > > F9 and its kernel should suffice, if not please outline the problem > and Jarod will either explain what to do or fix the Fedora kernel/lirc > package. Thanks! > _______________________________________________ atrpms-users mailing list [email protected] http://lists.atrpms.net/mailman/listinfo/atrpms-users
