On Sun, Jan 24, 2010 at 9:58 PM, Paulo Cavalcanti <pro...@gmail.com> wrote:
> > > On Sun, Jan 24, 2010 at 9:15 PM, Don Bossung <don...@bossung.net> wrote: > >> >> >> > -------- Original Message -------- >> > Subject: Re: [ATrpms-users] CentOS kernel upgrade=no pvr150 cards >> > From: Paulo Cavalcanti <pro...@gmail.com> >> > Date: Sun, January 24, 2010 2:41 pm >> > To: Don Bossung <don...@bossung.net> >> > Cc: atrpms-users@atrpms.net >> > On Sun, Jan 24, 2010 at 7:26 PM, Don Bossung <don...@bossung.net> >> wrote: >> > > I have a CentOS base (5.4) that was running kernel >> > > 2.6.18-164.10.1.el5.centos.plus x86_64 SMP. >> > > >> > > I recently added an nvidia 9500 video card and when I dl'd the >> > > nvidia-graphics package it pulled >> > > nvidia-graphics190.53-kmdl-2.6.18-164.11.1.el5.centos.plus along with >> > > kernel 2.6.18-164.11.1.el5.centos.plus. >> > > >> > > When I reboot, my 2 pvr150s are not in dev. They show up in lspci, >> they >> > > show up in the machines bios, but /dev/video0 and /dev/video1 do not >> > > show up. When I downgrade back to 2.6.18-164.10.1.el5.centos.plus >> kernel >> > > and reboot, video0 and video1 come back. The problem I am running into >> > > now is that I cannot get the nvidia kmdl for kernel >> > > 2.6.18-164.10.1.el5.centos.plus and such cannot use the new card. >> > > >> > > Any ideas of how to proceed troubleshooting this? Is there another >> > > upgrade/problem to deal with? >> > > >> > > >> > Do you have video4linux installed? >> > If not, try installing it. Otherwise, >> > try downgrading module-init-tools to this version: >> > module-init-tools-3.3-0.pre3. >> > 1.42.el5 >> > -- >> > Paulo Roma Cavalcanti >> > LCG - UFRJ >> >> video4linux = 1:20090907-91.el5 >> >> Note: the pvr150s were working well until the kernel upgrade to >> 2.6.18-165.11 >> >> Not to be dense, but could you give me a push toward the downgrade? The >> module-init-tools on the CentOS 5.4 DVD and at atrpms is 1.54, which is >> the same version before the kernel upgrade when things were working. >> >> > This is how I do: > > wget > http://mirror.centos.org/centos/5.3/os/x86_64/CentOS/module-init-tools-3.3-0.pre3.1.42.el5.x86_64.rpm > > sudo rpm -e module-init-tools --nodeps > > sudo rpm -ivh module-init-tools-3.3-0.pre3.1.42.el5.i386.rpm > > reboot > > Maybe this will fix your problem for now. > > > Sorry, it is the 64 bit version you need: rpm -ivh module-init-tools-3.3-0.pre3.1.42.el5.x86_64.rpm -- Paulo Roma Cavalcanti LCG - UFRJ
_______________________________________________ atrpms-users mailing list atrpms-users@atrpms.net http://lists.atrpms.net/mailman/listinfo/atrpms-users