Kirk Bocek wrote: > I have ieee1394-kmdl-2.6.18-164.10.1.el5-2.6.18-2.el5 installed on a > CentOS x64 host. The 1394 card is a 32-bit PCI Via VT6306: > > 02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE > 1394 OHCI Link Layer Controller (rev 46) (prog-if 10 [OHCI]) > Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI > Link Layer Controller > Flags: bus master, stepping, medium devsel, latency 32, IRQ 217 > Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] > I/O ports at ef00 [size=128] > Capabilities: [50] Power Management version 2 > > When I attach a DCT6200 STB to the card I get:
After rebooting this host, I discovered that the drivers are *not* loading automatically. Does this mean I have an incompatible firewire card? If I manually load the drivers, I get: $modprobe -v ieee1394 insmod /lib/modules/2.6.18-164.10.1.el5/updates/drivers/ieee1394/ieee1394.ko $modprobe -v ohci1394 insmod /lib/modules/2.6.18-164.10.1.el5/updates/drivers/ieee1394/ohci1394.ko $dmesg ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 217 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[217] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] _______________________________________________ atrpms-users mailing list atrpms-users@atrpms.net http://lists.atrpms.net/mailman/listinfo/atrpms-users