hi, What version of atv bootloader are you using? 0.8 works fine for me, but 1.0 no.
On Wed, Feb 29, 2012 at 12:50 PM, JimmiJones <ryanc...@gmail.com> wrote: > And another update. I plugged all the equipment in yesterday while > straightening out my office and one of the two cloned boxed worked?!? > So, I pulled it's drive and hooked it up to my backend and made an > image. Then I wrote that image to the final box. No joy. I get the > flashing appletv with question mark at boot. I am starting to wonder > if there might be something wrong with the final hard drive. > > On Feb 28, 10:21 am, JimmiJones <ryanc...@gmail.com> wrote: >> I am still working on this and have found some really odd behavior. I >> decided that the easiest thing to do would to be use dd to make a disk >> image of the working mythtv front end then apply this image to the >> others and change the needed things like computer name and ip address. >> They don't boot into myth. They drop to a command prompt. It is really >> quite odd. Anyone have any ideas for me? >> >> On Jan 16, 11:10 am, JimmiJones <ryanc...@gmail.com> wrote: >> >> >> >> >> >> >> >> > I have successfully installed avt-bootloader and mythtv 10.10 on a >> > first generation appletv. Actually, this is the second I have done, >> > but the first was almost a year ago and I did not take proper notes. >> >> > I am having trouble remembering how I configured the atv-bootloader to >> > run a kexec jump to the mythtv kernel. What is even weirder is that I >> > can not mount the partition that mythtv is installed to. I keep >> > getting an "invalid argument" failure. I get the same failure for both >> > the first partition, where I put grub, and the fourth partition, where >> > I put mythtv. >> >> > I installed using a netboot as the instructions >> > herehttp://code.google.com/p/atv-bootloader/wiki/BootingLiveCDdescribe. >> >> > I can ssh into my other existing appletv front end and poke around and >> > see the menu.lst in grub. I was hoping to copy that configuration >> > over, but if I can't get to the partition I can't modify the file. >> >> > I would appreciate anyone with more linux knowledge than me, which is >> > just about everyone, that is willing to try and help. >> >> > TIA, >> >> > Ryan > > -- > To post to this group, send email to atv-bootloader@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/atv-bootloader?hl=en -- Christian Lyra PoP-PR/RNP -- To post to this group, send email to atv-bootloader@googlegroups.com For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en
