Re: Accessible Sound Design by Ebon Sky Studios - Third Lesson Up
You have to understand what's going on here. Bands are frequencies that you are boosting or attenuating with the gain. So you set the center frequency, and it will act on that based on your settings with gain and also with bandwidth, which is literally how wide the band is. or to be expressed loosely like OK, our center is 3500Hz, so we'll work on plus or minus 300Hz.
I just think this comes down to incorrect use. Your frequency could have been too high or low by the time you turned up the gain that there is literally nothing to boost. You also have four tabs. The outer two i.e. 1 and 4 are low and high shelves respectively. The inner 2, i.e. 2 and 3 are set to band. You could experiment with the outer two and set them, then reduce the gain to see if they are cut.
-- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
