i saw in the original mod that one is to replace the original caps w/ a 4.7uf, 50v and simply wire from there to the RCA outputs.
here's the rub: when i tried to remove the stock caps (shown in green circles of the pic), i throw the solder pads they're attached to. its like the pads pull off the board when i try to pull the caps out, which makes it impossible to solder anything back onto the board where the original caps mounted. (i really fouled my first when i threw the traces on the board as well). does anyone have good advice on how to safely remove the caps so that the solder pads don't come up with them? many thx rhyno +-------------------------------------------------------------------+ |Filename: SB3 board.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=5066| +-------------------------------------------------------------------+ -- rhyno138 ------------------------------------------------------------------------ rhyno138's Profile: http://forums.slimdevices.com/member.php?userid=11948 View this thread: http://forums.slimdevices.com/showthread.php?t=19822 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/audiophiles