seanadams;562657 Wrote: > Indeed, the voltages are completely different. However, they will always > be correct on the respective interface - each has its own electronics > for the driving circuit. The software setting only controls the > contents of the data stream, which is sent to all ports the same. > > > > Actually for the best signal you should use either of the 75Ω coax > outputs. Although TP implements AES/EBU as well as possible, it is a > defective specification and its only practical use is to take advantage > of microphone cables you might have lying around the studio, which are > terrible for this purpose.
Please make this a sticky! -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=80480 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/audiophiles
