Thanks for that I'm thinking faulty unit Sent from my iPhone
On 13 Aug 2018, at 5:51 pm, Brad Peczka <b...@bradpeczka.com<mailto:b...@bradpeczka.com>> wrote: I run a fleet of the APC ATSes - some of which are coming on 10 years service - with no noted issues beyond some caveats in the firmware update process. In the absence of details on the error the UPSes threw, the original issue sounds like a faulty device. Eaton are a good alternative but there's certainly nothing wrong with the APC units. Regards, -Brad. ________________________________ From: AusNOG <ausnog-boun...@lists.ausnog.net<mailto:ausnog-boun...@lists.ausnog.net>> on behalf of Nicholas Hobbs <nicholas.ho...@epworth.org.au<mailto:nicholas.ho...@epworth.org.au>> Sent: Monday, 13 August 2018 2:53 PM To: Rhys Cuff (Latrobe IT); ausnog@lists.ausnog.net<mailto:ausnog@lists.ausnog.net> Subject: Re: [AusNOG] ATS recommendation Hi Rhys, We run a number (~6 or so) of the APC ATS' for some of our critical (but only 1 PSU) gear with no issues. We did however have one that was faulty from new that switched between A&B feeds a bit randomly and was replaced because there was no reason it should have been switching. Have you called APC to try and troubleshoot the issue? I'm not sure how the ATS could trip the UPS/Breakers as there should only ever be one active circuit unless there's a fault or overload condition. What size UPS' are behind the ATS? 3000VA or so? Nick Nicholas Hobbs Chief Technology Officer Epworth HealthCare Phone: (03) 9426 8840 Fax: (03) 9097 0062 Mobile: 0417 438 322 epworth.org.au<https://www.epworth.org.au> <image001.jpg> From: Rhys Cuff (Latrobe IT) [mailto:r...@latrobeit.com.au] Sent: Monday, 13 August 2018 2:19 PM To: ausnog@lists.ausnog.net<mailto:ausnog@lists.ausnog.net> Subject: [AusNOG] ATS recommendation Hi Guys We have a very small server room with one rack drawing around 8 amps. I thought I was clever and installed an APC ATS to run the kit that only has single feel power input. Well its been a disaster, final straw was 4am today when it caused both UPS's to error and trip all breakers. Bypassing the ATS fixed it. I'm thinking of abandoning the ATS idea or trying another brand like Eaton Does anyone have any thoughts on this? Thanks Rhys ________________________________ This e-mail message and accompanying data may contain information that is confidential and subject to privilege. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this e-mail in error please notify the sender immediately by return e-mail and delete all material pertaining to this e-mail. The views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Epworth HealthCare. Epworth does not warrant that the integrity of the communication has been maintained nor that the communication is free of errors, virus, interception or interference. All e-mail sent to Epworth HealthCare may be inspected and used by Epworth HealthCare for any lawful purpose. Epworth HealthCare policy prohibiting transmission of inappropriate material to its e-mail addresses is strictly enforced.
_______________________________________________ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog