Pretty sure that model doesn't have a console port - or at least not one exposed via external interface connector for the user to access. But maybe theres an on-board UART via pins somewhere.
You could try supp...@alliedtelesis.net.nz. They will usually respond. They have a good engineering resource in Christchurch NZ. > On 22/05/2020, at 8:07 PM, Duncan Gray <gray.dun...@gmail.com> wrote: > > I’m not familiar with that device in particular. > > Does it have any output on the console when you cold boot it? > > >> On 22 May 2020, at 10:15 am, Jim Woodward <j...@alwaysnever.net> wrote: >> >> I have a older edge switch - Allied Telesis AT-GS950/8 which had a failed >> flash upgrade - now no longer boots, it will establish link on the switch >> ports but presents no traffic and bridges no traffic (Checked with >> Wireshark) >> >> Does anyone know if these are able to be put in a recovery mode or should I >> just bin it and be done with it? _______________________________________________ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog