What’s the forwarding table size requirements? If small or can use selective 
route download tricks, get a switch.

Haven’t touched Cisco in a while but Arista and Juniper have cheap Tomahawk 
based switches that will do the job.

Otherwise the Juniper MX204 is probably the sweet spot router you want.

Sent from my iPhone

On Nov 17, 2020, at 4:21 AM, Simon Dixon <si...@dicko.net.au> wrote:



look at an MX204 before an MX80, as they only have 2gig of ram and a very very 
very very very slow RE CPU.  So not much good for multiple full tables and very 
slow convergence time.  Which is fine in some cases.

Simon.


On Tue, 17 Nov 2020 at 16:48, DaZZa 
<dazzagi...@gmail.com<mailto:dazzagi...@gmail.com>> wrote:
How much do you want to spend?

A Juniper MX 80 will easily do that, and carry up to 8 X 10 gig ports.

An MX 40 only has 4 X 10 gig or I'd say use one of those.

You could do it cheaper with an SRX1500 in packet mode, but the total 
throughout is lower than the 80gig the MX80 will push.

D

On Tue, 17 Nov 2020, 6:20 pm Darren Moss, 
<darren.m...@cloud365.com.au<mailto:darren.m...@cloud365.com.au>> wrote:
Hi Dave,

Preferably able to move 10GBps around but we can do 10GBps ports for now so 
long as we can spike for short periods.

Typical traffic is well under, but we do move backups and replication data 
usually overnight in AU so we could run less and still be fine.

Cheers


Darren.

From: Dave Browning [mailto:d...@dlbnetworks.com<mailto:d...@dlbnetworks.com>]
Sent: Tuesday, 17 November 2020 6:15 PM
To: Darren Moss
Cc: AusNOG Mailing List
Subject: Re: [AusNOG] 10GBps router suggestions

Do you just need 10Gbe holes, or be able to move 10Gbp/s around as well?


On 17 Nov 2020, at 5:12 pm, Darren Moss 
<darren.m...@cloud365.com.au<mailto:darren.m...@cloud365.com.au>> wrote:

Hi Noggers,

I am looking to upgrade (replace) 3x  Cisco routers.

My preference is Cisco, however open to considering others.

Must have dual PSUs and support 10GBps interfaces.

We have 3 public (fibre) and 2 private interfaces on each router.

Happy to hear suggestions.

Many thanks


Darren.
_______________________________________________
AusNOG mailing list
AusNOG@lists.ausnog.net<mailto:AusNOG@lists.ausnog.net>
http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________
AusNOG mailing list
AusNOG@lists.ausnog.net<mailto:AusNOG@lists.ausnog.net>
http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________
AusNOG mailing list
AusNOG@lists.ausnog.net<mailto:AusNOG@lists.ausnog.net>
http://lists.ausnog.net/mailman/listinfo/ausnog


--

Dicko.
_______________________________________________
AusNOG mailing list
AusNOG@lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________
AusNOG mailing list
AusNOG@lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog

Reply via email to