On 2011-04-19,at 14:22:23, Amos Kong wrote: >发送日期：2011-04-19 14:22:23 >收件人：wuyu8242 >抄送：Lucas Meneghel Rodrigues; autotest >主题：Re: Re: [Autotest] [PATCH 1/3] KVM-test: Add script to setupprivatebridge >> >On Tue, Apr 19, 2011 at 01:29:42PM +0800, wuyu8242 wrote: >> Good news come from Amos When I just want to report an issue about this nic >> mode to both of you. Then I describe the issue for referring. I found the >> mac addr generated >> from code is same as the hwaddr in result of ifconfig in guest, but it >> different from the hwaddr value in the ifcfg-eth0 file. So the framework >> report error info of "Cannot find IP address for MAC address >> 9a:xx:xx:xx:xx:xx". In last week, I report the pass of tap mode, because my >> image is setup manually. Today, the case failed. >> now, I will update code to use the new method of private bridge. > >This patch would not fix your problem. >You should delete the mac entry in ifcfg-eth0 of guest. the patch can not setup bridge automatically? when I deleted the mac entry(hwaddr variant) in ifcfg-eth0 of guest, but restart the network service failed. After reboot guest, although the hwaddr variant cannot be assigned mac, this issue still be there. so this mathod doesn't work well. Besides, it should not be modified by hand, this modifying should be made by autotest framework. What is the cause of this inconsistency? When the ifcfg-eth0 file is generated? Each time you start vm, this file should be rewritten, right?
>> Thanks! >> wuyu _______________________________________________ Autotest mailing list [email protected] http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
