"Steve Franks" wrote: > I hope this isn't inappropriate for this list. I've 3 jtagice2's with > broken cables. I'll trade any of them for dragons. I never debug > anyway. The cables are broken, so I cannot guarantee they function, > but problems appear related to wiggling cables, and then they work > intermittently. Tried to replace cables as per previous discussions > on this list, but Atmel, in their infinite wisdom (1) used a flimsy > 0.5mm cable for something that gets beat around the lab in the first > place, and (2) stripped opposite sides of the cable on opposite ends, > making something that can only be replaced by someone with the > capability to strip flex. You have been warned. I've also > disassembled them, and there appears no good place to solder headers > inside to pick up the jtag signals. Anyway, $900 of scrap laying > around my lab as far as I'm concerned... > > I suggest off-list replies if anyone with a flex stripper has interest in > them. > > Steve
You can purchase new cables with the circuit board on the end from Digi-Key and Mouser. Search for ATJTAGPROBE at either site. They cost ~$40.00 US. Molex carries individual cables that I believe will work as a replacement. The 9" version is part number: 0210200332 http://www.molex.com/molex/products/datasheet.jsp?part=active/0210200332_CAB LE.xml Molex is good about sending samples, but in my experience they are not quick to ship them. -Preston _______________________________________________ AVR-chat mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/avr-chat
