Hi Pierce, I also saw your problem description on the Arduino dev mailing list.
Can you post the command line you're using? And any capture of the output you're seeing. BTW, next time you can also just post this on the avrdude mailing list. ;-) Eric > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On > Behalf Of Pierce Nichols > Sent: Tuesday, January 29, 2013 11:20 AM > To: [email protected] > Subject: [avr-chat] Introduction, and flashing bootloaders with a > USBTiny programmer > > All, > > > My name is Pierce Nichols, and I run a small company (Logos > Electromechanical, www.logos-electro.com) building a variety of OSHW > products. One of these is the Zigduino, an Arduino variant with a > built-in 802.15.4 radio. > > > I use Sparkfun's version of the usbtiny with avrdude 5.11 to flash the > bootloader onto the Zigduino. For reasons that are unclear to me, > avrdude insists on writing all of the flash in order to put the > bootloader at the top of the flash, which take about a minute and a > half per board. This is painful when flashing several hundred. > > > I use the default config file, and I've confirm the problem is present > under both Windows 7 and Linux (Ubuntu 12.10, to be specific). Am I > missing something, or is this a bug in AVRDude? > > > -p > > > -- > Pierce Nichols > Principal Engineer > Logos Electromechanical, LLC _______________________________________________ AVR-chat mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/avr-chat
