I am using Arch Linux.
I am trying to program AVR chips with a Kanda branded avrisp programmer via
avrdude (or any program short of writing my own.)
The chip is in this dev board:
http://www.kanda.com/products/Kanda/STK200.html although in the slim chance
the board is doing something crazy, I have also tried programming the chip
straight from the isp.
When I plug in the programmer, FTDI shows up in dmesg output:
[ 1814.377441] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
[ 1814.467806] ftdi_sio 2-1.6:1.0: FTDI USB Serial Device converter
detected
[ 1814.467854] usb 2-1.6: Detected FT2232C
[ 1814.467858] usb 2-1.6: Number of endpoints 2
[ 1814.467862] usb 2-1.6: Endpoint 1 MaxPacketSize 64
[ 1814.467866] usb 2-1.6: Endpoint 2 MaxPacketSize 64
[ 1814.467869] usb 2-1.6: Setting MaxPacketSize 64
[ 1814.468388] usb 2-1.6: FTDI USB Serial Device converter now attached
to ttyUSB0
[ 1814.469873] ftdi_sio 2-1.6:1.1: FTDI USB Serial Device converter
detected
[ 1814.469915] usb 2-1.6: Detected FT2232C
[ 1814.469919] usb 2-1.6: Number of endpoints 2
[ 1814.469923] usb 2-1.6: Endpoint 1 MaxPacketSize 64
[ 1814.469926] usb 2-1.6: Endpoint 2 MaxPacketSize 64
[ 1814.469930] usb 2-1.6: Setting MaxPacketSize 64
[ 1814.470425] usb 2-1.6: FTDI USB Serial Device converter now attached
to ttyUSB1
Output of lsusb -v -dhttp://pastebin.com/2M1PNWY1
The programmer is known to work, as I just used it to program the
attiny2313 in win xp, a process I don't feel I need to do since I can
develop and compile on linux or mac os x (with which I don't even get a new
device in /dev )
I have tried every programmer on avrdude's list with the most common
response being 'timeout' and 'programmer not responding'.
I have tried overriding the speed from 2400-115200
I have tried adding various udev rules both found on the internet and
written by me. Does the OS need something more to be able to talk to the
attiny2313 via the USB-Serial converter?
I am at a loss as to what to do now and need some help troubleshooting
this. I know it's not rocket science.
I have read countless posts and searched for hours now and still 0 progress
has been made.
What info can I provide to help troubleshoot?
Why is avrdude just not "seeing" it?
_______________________________________________
AVR-chat mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avr-chat
