After a firmware upgrade of my JTAGICE3 (1.25 -> 3.23) my JTAGIC3 had
become totally unusable: avrdude 6.0.1 failed top open the USB port (...
did not find any device "usb"). Some googling showed that this is a
known problem, and which has been fixed on avrdude-6.1.
But, building 6.1 on my Mandriva platform (for a plain install from the
tarball and, evidently also for building an rpm package) failed due to
compiler errors in the modules flip1.c and flip2.c - which use uint32_t
in declarations, but uint32_t is not defined.
Is this a known problem? Intuitively, I added a "typedef int uint32_t",
which made the problem go away (easier to implement than expicitely
changing all instances of the uint32_t declarations) - or is there an
include that should be added?. Result: the programmer works again as it
should.
Note: it appears that the upgrade also changed the USB ID from 03eb:2110
to 03eb:2140 - there is also the need to change the udev rules
correspondingly, possibly also in the rpm package in case that adds the
rule for the JTAGICE3
Question: I do not like to depend on intuition - is this a proper way to
fix the compilation problem in avrdude 6.1?
Juergen
_______________________________________________
AVR-chat mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avr-chat
