On 07/30/2014 10:02 PM, Andreas Graebe wrote:
The order of the separate displayed fusebytes is right, but in the
resume, H: and E: are changed.
Here is what I get - which looks OK
<harms@ltjuergen ~> avrdude -v -p AT90CAN128 -c jtag3 -P usb
... snip
Programmer Type : JTAGICE3
Description : Atmel AVR JTAGICE3 in JTAG mode
ICE hardware version: 2
ICE firmware version: 3.23 (rel. 45)
... snip
avrdude: Device signature = 0x1e9781
avrdude: safemode: lfuse reads as EF
avrdude: safemode: hfuse reads as 11
avrdude: safemode: efuse reads as F5
avrdude: safemode: lfuse reads as EF
avrdude: safemode: hfuse reads as 11
avrdude: safemode: efuse reads as F5
avrdude: safemode: Fuses OK (E:F5, H:11, L:EF)
avrdude done. Thank you.
What programmer are you using, where is the difference between your
environment and mine? I am using avrdude 6.1, and the firmware in my
jtagice3 has been upgraded under AtmelStudio 6.2 (with this upgrade
installed, avrdude < 6.1 does not work correctly, at least for JTAG3).
Juergen
_______________________________________________
AVR-chat mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avr-chat
