Hi, I had a lot of problems with 32bit AVR with avrdude, so I ended with dfu-programmer. Update through USB is fast and safe. I know it is not avrdude, but honestly: support for AVR 32 is not best (even from Atmel side) so better this than nothing.
Regards Martin On 17 Dec 2015 03:18, "sebastian Oldani" <[email protected]> wrote: > Hello friend, i am trying to program a uC in linux, is my first time. > I need a configuration file por this uC (at32uc3c1512) i tried to edit > the avrdude.conf in this way > > #------------------------------------------------------------ > # AVR32UC3C1512 > #------------------------------------------------------------ > > part > id = "uc3c1512"; > desc = "AT32UC3C1512"; > signature = 0x00 0x40 0x3F; > has_jtag = yes; > is_avr32 = yes; > > memory "flash" > paged = yes; > page_size = 512; # bytes > readsize = 512; # bytes > num_pages = 1024; # could be set dynamicly > size = 0x00080000; # could be set dynamicly > offset = 0x80000000; > ; > ; > > I search for the signature value, and it has one byte more, but > signature only has three places. > > When i try to (for example) erase the uC, i have this error msj: > > avrdude: jtagmkII_program_enable(): bad response to enter progmode > command: RSP_ILLEGAL_JTAG_ID > avrdude: jtagmkII_program_enable(): bad response to enter progmode > command: RSP_ILLEGAL_JTAG_ID > avrdude: JTAGEN fuse disabled? > avrdude: initialization failed, rc=-1 > Double check connections and try again, or use -F to override > this check. > > Anybody can help me?, i want to program a AT32UC3C1512 from linux with > avrdude. > > Thank You!!! > > _______________________________________________ > AVR-chat mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/avr-chat >
_______________________________________________ AVR-chat mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/avr-chat
