In my github avrdude repo, there's some infos about USB configuration. https://github.com/doom-fr/avrdude
This might help you ! ... or not D. ᐧ Le ven. 16 avr. 2021 à 14:34, Robert Cochran <[email protected]> a écrit : > Hi! > > If you want to load a sketch onto an Arduino or Arduino-compatible device > on a Linux system this might help: > > https://www.arduino.cc/en/guide/linux > > Thanks so much > > Bob > > > > On Fri, Apr 16, 2021 at 6:24 AM Johannes Köhler < > [email protected]> wrote: > >> On 16.04.21 00:37, kefko wrote: >> > >> > Dear AVR dudes, >> > [...] >> >> I got a private reply to my posting in your >> list. "My posting could not be understood, and >> that would be a matter to alienate me from the avr list" >> >> Sorry about that! My aim was not like that. >> My first posting to this list should be like >> "fresh to read"... That because, i used all of >> the hacker keywords i did learn :) >> >> Excuse me, i wouldnt go to use your list like a >> blog to dump myself, in the future. >> >> My request was to find a way to deal with >> the following precise problem: >> >> Using Port : /dev/ttyXYZ >> Using Programmer : stk500v2 >> Overriding Baud Rate : 57600 >> avrdude: ser_open(): can't open device "/dev/ttyXYZ": >> Input/output error >> >> I am not lazy with reading manpages and other >> documentation. But it should be the proper text... >> One linuxsystem is dropping out (asmedia usb) the other >> not (insyd bios)... >> >> thx and sincerely >> - kefko >> >>
