Follow-up Comment #3, patch #7464 (project avr-libc):
Ok then, I did not realise that iom186p.h is auto generated. My problem is
that I have a board that started development life with an atmega168 on it,
since it is now hard to get it has been replaced with the atmega168p (and
there is also a atmega168v) I have updated to the newer chip. There are
several differences with names between the iom168.h and iom168p.h that have
caused re-compilation problems. One was the vector names, I though that SIG_
were the newer ones not the ones that have been replaced, no problems I can
update my code for this to work. There is a problem however with the port bit
names though. iom168.h (or iomx8.h) names them PA0 PB0 etc, iom168p.h names
them PORTA0 PORTB0 etc. and neither file have the other definition.
Maybe a better fix then for this instance is to add the PORTA0, PORTB0 etc
#defines to the iomx8.h file. I can make this change and update the patch
files to add the PORTxx #define if you want.
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/patch/?7464>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
_______________________________________________
AVR-libc-dev mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avr-libc-dev
