Hello ml! Sorry for disturbing in an non-dev manner, but I can't find an answer nowhere on the internet so my last try is this mailin list. I was going to flash an ATMEGA8L on a brushless controller board and I have an FTDI experimental board with a FT 2232D. As far as I've read it should work with this ftdi-chip. I took a glance on the avrdude.conf and reallized that there has to be a pin-order for the used chip. But I couldnt figure it out to get it working with my 2232_D_ because in my eyes the description was for an 2232_H_ only. In the avrdude.conf I can read, that I have to use the pins 1 to 4 of lower ACBUS and 5 to 8 as higher ACBUS . But in the datasheet of the 2232D I notice only ACBUS 0 to 3 and they are named GPIO_Hx_ (I think "higher" nibble?). Should it work with the 2232D?
So as far as I understand, the functionality with LEDs is limited to the FT2232_H_ only?! Or did I misunderstood something? Please let me know how to understand the pin order. Greetings Daniel _______________________________________________ avrdude-dev mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/avrdude-dev
