Hi,
I have some issues with the FT232 programmer code.. I had to define a
custom pinout, and the BUFF pin is not recognized. Is that okay, or the
ftdi_syncbb does not support the BUFF pin?
programmer
id = "kac-cmos";
type = "ftdi_syncbb";
connection_type = usb;
miso = 7; # /DCD
sck = 4; # /CTS
mosi = 6; # /DSR
reset = 5; # /DTR
buff = 8; # /RI
;
results in -v printout of:
Programmer Type : ftdi_syncbb
Description :
Pin assignment : 1..8 = DBUS0..7, 9..12 = GPIO0..3
RESET = 5
SCK = 4
MOSI = 6
MISO = 7
And the second issue is, that after that the text goes like:
ft245r: spi bitclk 75000 -> ft baudrate 150000
avrdude: ft245r_program_enable: failed
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
The chip I am using is however a FT232RQ:
Bus 003 Device 015: ID 0403:6001 Future Technology Devices
International, Ltd FT232 USB-Serial (UART) IC
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6001 FT232 USB-Serial (UART) IC
bcdDevice 6.00
iManufacturer 1 FTDI
iProduct 2 FT232R USB UART
iSerial 3 A4002rtk
bNumConfigurations 1
I am using:
avrdude: Version 5.11svn, compiled on Aug 13 2012 at 21:14:46
(with FT2232 in custom configurations it works perfectly!)
Daniel
_______________________________________________
avrdude-dev mailing list
avrdude-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/avrdude-dev