Hi,
I guess you using the Windows binary from our download area.
This indeed does not work with the pickit2.
If I compile the current revision for myself it works. So I guess the
problem is the cross-compiling of the Windows binary.
My configure prints out the following:
...
checking for ddk/hidsdi.h... yes
...
Configuration summary:
----------------------
DON'T HAVE libelf
DO HAVE libusb
DON'T HAVE libusb_1_0
DON'T HAVE libftdi1
DON'T HAVE libftdi
DO HAVE libhid
DO HAVE pthread
DISABLED doc
ENABLED parport
DISABLED linuxgpio
So I guess the crosscompile did not find libhid?
In avrdude pickit2 supports using Windows HID interface or as
alternative also libusb, but for latter you need to install the libusb
Windows driver for the pickit2.
Kind regards
René
Am 02.01.2014 20:54, schrieb Bege:
Hello,
I can't manage to get Avrdude running with Pickit2.
I'm on Windows.
Entering "avrdude -c pickit2 -p m328" in a DOS box, I get this
error:
"avrdude: error: could not find PICkit2 with vid=0x4d8 pid=0x33"
Pickit2 is connected to USB and functional with the Microchip Pickit
Software. Also the Windows device manager shows exactly this Vid/Pid
(0x4d8/0x33) for my Pickit2 device.
Is there anything I forgot to configure ?
My system:
WinXp, SP3, 32bit
Pickit-FW is PK2V023200
Avrdude: 6.1-svn-20131205
Any ideas ?
Thanks for your help
_______________________________________________
avrdude-dev mailing list
[1][email protected]
[2]https://lists.nongnu.org/mailman/listinfo/avrdude-dev
References
1. mailto:[email protected]
2. https://lists.nongnu.org/mailman/listinfo/avrdude-dev
_______________________________________________
avrdude-dev mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avrdude-dev
