Hi, connection_type is used from avrdude 6.x. You seem to use avrdude 5.11 or earlier? (avrdude 6.x has changed from type=stkv500v2 to type="stk500v2")
You better provide for any questions to the mailing list, the version you use and your command line and any other relevant setup. Kind regards René Am 19.01.2014 13:37, schrieb László Monda: > I can see the following relevant programmer definitions for avrisp2 in > avrdude.conf: > > programmer > id = "avrisp2"; > desc = "Atmel AVR ISP mkII"; > type = stk500v2; > ; > > programmer > id = "stk500v2"; > desc = "Atmel STK500 Version 2.x firmware"; > type = stk500v2; > ; > > I cannot see connection type being part of these programmer definitions. > > Also, default_usb = "usb"; seems to produce the > error at /etc/avrdude.conf:19 unrecognized character: "d" > error message > > On Sun, Jan 19, 2014 at 1:02 PM, Joerg Wunsch <[email protected]> wrote: >> As László Monda wrote: >> >>> Instead of supplying "-P usb" in the command line every time I'd like >>> to set it as a default. The following directives in the configuration >>> file didn't do the trick: >> Vor which programmer type? >> >> The default connection type is part of the programmer definition in >> avrdude.conf. Depending on that, the following switch statement then >> decides about the portname to use in absence of a -P option: >> >> if (port == NULL) { >> switch (pgm->conntype) >> { >> case CONNTYPE_PARALLEL: >> port = default_parallel; >> break; >> >> case CONNTYPE_SERIAL: >> port = default_serial; >> break; >> >> case CONNTYPE_USB: >> port = DEFAULT_USB; >> break; >> } >> } >> >> -- >> cheers, Joerg .-.-. --... ...-- -.. . DL8DTL >> >> http://www.sax.de/~joerg/ >> Never trust an operating system you don't have sources for. ;-) > > _______________________________________________ avrdude-dev mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/avrdude-dev
