URL:
<http://savannah.nongnu.org/bugs/?46992>
Summary: AVR dragon does not recognize target
Project: AVR Downloader/UploaDEr
Submitted by: None
Submitted on: Wed 27 Jan 2016 01:16:27 PM UTC
Category: None
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: None
Status: None
Privacy: Public
Assigned to: None
Originator Name: Daniel
Originator Email: [email protected]
Open/Closed: Open
Discussion Lock: Any
_______________________________________________________
Details:
I am trying to program a ATtiny85 using avrdude 6.2
running on Debian Testing under Linux 4.3.0.
I am launching avrdude with the following parameters:
-p t85 -c usbasp -e -V -B 10
The AVR dragon recognizes the target VCC voltage but
is unable to read the target device id.
Attached is a avrdude -vvvv log and a pulseview screenshot
that was captured on the target device. Using this setup
I'm able to program the target using a USBasp clone,
so the wiring should be correct.
_______________________________________________________
File Attachments:
-------------------------------------------------------
Date: Wed 27 Jan 2016 01:16:27 PM UTC Name: log.txt Size: 3kB By: None
<http://savannah.nongnu.org/bugs/download.php?file_id=36174>
-------------------------------------------------------
Date: Wed 27 Jan 2016 01:16:27 PM UTC Name: screenshot.png Size: 74kB By:
None
<http://savannah.nongnu.org/bugs/download.php?file_id=36175>
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?46992>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
_______________________________________________
avrdude-dev mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avrdude-dev
