Congratulations !!!

Kenneth Johansson wrote:
I just tested my serial cable I made by trying booting linux on my
axim50v and it's sort of working.

Now I need to install the development environment and get hold of the
linux kernel. Where are the patches for the axim50v located

this is my output
-------------
Uncompressing 
Linux..................................................................... 
done, booting the kernel.

69054114:0000028F:00003A7A
A811AB74-A8325974>A8008000
A8325974
A8008000: E321F0D3 EB000052 E1B0A005 03A00070  0A00004D EB000066 E1B08005 
03A00061
A8008020: 0A000049 EB00002B E59FD004 E28FE068  E28AF00C C0008058 C01D6000 
C01D6000
A8008040: C0212DC0 C022D6E4 C0216FE0 C0216FD4  C01D8FC8 C01D8000 E24F3028 
E8B300F0
A8008060: E1540005 11550006 1494B004 1485B004  1AFFFFFB E3A0B000 E1560007 
3486B004
A8008080: 3AFFFFFC E8932070 E5849000 E5851000  E3C04002 E8860011 EA000168 
E3800002
A80080A0: E3A0501F EE035F10 EE024F10 EA000003  00000000 00000000 00000000 
00000000
A80080C0: E1A00000 EE010F10 EE103F10 E1A03003  E1A03003 E1A0F00D E5985004 
E24F40E4
A80080E0: E2444901 E1A00004 E3A03000 E2806901  E4803004 E4803004 E4803004 
E4803004
Linux version 2.6.11-hh2 ([EMAIL PROTECTED]) (gcc version 3.3.3) #1 Mon Jun 13 
22:44:26 CST 2005
CPU: XScale-PXA270 [69054114] revision 4 (ARMv5TE)
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Machine: Dell Axim X30
Memory policy: ECC disabled, Data cache writeback
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 624.00MHz (*3.0, active)
Memory clock: 208.00MHz (/2)
System bus clock: 208.00MHz
Built 1 zonelists
Kernel command line: root=/dev/ram0 rw ramdisk_size=12288 keepinitrd 
init=/linuxrc  console=tty0 console=ttyS0,115200n8
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62128KB available (1761K code, 349K data, 84K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
NET: Registered protocol family 16
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits: 00300879
pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits: 00100008
Console: switching to colour frame buffer device 60x53
ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
IPAQ flash: probing 32-bit flash bus, window=0
Probe at base[0x00](0x00000000) past the end of the map(0xffffffff)
Probe at base[0x00](0x00000000) past the end of the map(0xffffffff)
Probe at base[0x00](0x00000000) past the end of the map(0xffffffff)
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
mmc0: host does not support reading read-only switch. assuming write-enable.
mmcblk0: mmc0:275f  500224KiB
 /dev/mmc/blk0: p1
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 84K

now executing /linuxrc.
mounting virtual filesystems.
done.

The Penguins have taken control
on your handheld computer.
We are the .org.
.com as you know it is over.
Resistance is futile.

            (o_
(o_   (o_   //\
(/)_  (\)_  V_/_

Happpxa27x_udc: version magic '2.6.11-hh0tnb0 ARMv5 gcc-3.4' should be 
'2.6.11-hh2 preempt ARMv5 gcc-3.3'
y computing!

Starting USB networking
insmod: cannot insert 
`/lib/modules/2.6.11-hh0tnb0/kernel/drivers/usb/gadget/pxa27x_udc.ko': Invalid 
modg_ether: version magic '2.6.11-hh0'ule format (-1): Exec format error
insmod: cannot insert 
`/lib/modules/2.6.11-hh0tnb0/kernel/drivers/usb/gadget/g_ether.ko': Invalid 
module format (-1): Exec format error
ip: Cannot find device "usb0"
BusyBox v1.00-pre8 (2004.03.09-13:39+0000) multi-call binary

Usage: ip [ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }

ip [ OPTIONS ] OBJECT { COMMAND | help }
where  OBJECT := { link | addr | route | tunnel }
OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }


SIOCGIFFLAGS: No such device
BusyBox v1.00-pre8 (2004.03.09-13:39+0000) multi-call binary

Usage: ip [ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }

ip [ OPTIONS ] OBJECT { COMMAND | help }
where  OBJECT := { link | addr | route | tunnel }
OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }


ip: Cannot find device "usb0"
BusyBox v1.00-pre8 (2004.03.09-13:39+0000) multi-call binary

Usage: ip [ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }

ip [ OPTIONS ] OBJECT { COMMAND | help }
where  OBJECT := { link | addr | route | tunnel }
OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }


If this is not automatic, please run the following commands on the PC host:
modprobe usbnet (should be automatically done by USB hotplug)
ifconfig usb0 192.168.0.200
route add 192.168.0.202 dev usb0
Waiting for the PC host (192.168.0.200) to be available
through the USB ethernet connection...


--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to