On 9/8/05, Richard Bateman <[EMAIL PROTECTED]> wrote: > the following modules, in this order, for vsfb: > > cfbcopyarea.ko > cfbfillrect.ko > cfbimgblt.ko > vsfb.ko > > and for framebuffer support itself > > bitblit.ko > fbcon.ko > > I located my initrd and put it in > http://bateman.dhs.org/~richard/tmp/arm/initrd.cramfs.gz > > also, I *think* I may have located the correct kernel image, but I don't have > time to test it. > http://bateman.dhs.org/~richard/tmp/arm/zImage_for_cramfs_initrd > > hope this helps. the initrd was built with 2.6.11 kernel modules, so it might > not work with a newer kernel, but it has a good example of automounting a > root sd image and should automatically load the fb drivers... if it's the > right one. > > Good luck,
Thanks, but again, no luck at all... The only thing different between our 2 machines right now is tha fact that I don't have a serial cable, and that our haret and default.txt could be different (mine has all the "set GAFR" stuff in it). Could you provide me yours? And if you have the time, could you trying to boot withouth the serial cable attached? Are you still getting an image than? Also, I remember someone told that he had to copy all the files to an SD card to get it working? Could that be true? Cause I'm still trying from the built-in storage. I'll try that now... Oh, and another thing. Could ROM version have anything to do with this? I have recently updated the ROM to A05, but I don't think that'll be the problem. Greetz, JeDi -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
