take this haret:
www.fisherss.com/files/haret_uart.exe
it's a new haret version with serial port initializing code. if you
still can't get serial output, tell me , I will send you the zImage and
initrd which I am using.


Klavs M. Sorensen wrote:
>> where did you get the haret and zImage? they run in my 416 machine, and
>> also should work on yours. I don't think DELL has changed the hardware,
>> they must lose much money if the do that .
>>     
>  
> Fisherss : I took those from your page, 
> http://www.fisherss.com/files/alpha/haret.exe etc. 
>
> With your zImage and initrd the Haret 0.3.2 output looks like :
> Welcome, this is HaRET running on WindowsCE v4.21
> Minimal virtual address: 00010000, maximal virtual address: 7fffffff
> CPU is Intel ARM arch 5TE revision 0 product 17 stepping 4 running in system 
> mode
> Enter 'HELP' for a short command summary.
>
> HaRET(1)# set GAFR(34) 1 
> HaRET(2)# set GAFR(35) 1 
> HaRET(3)# set GAFR(37) 1 
> HaRET(4)# set GAFR(39) 2 
> HaRET(5)# set GAFR(40) 2 
> HaRET(6)# set GAFR(41) 2 
> HaRET(7)# set GPDR(34) 0 
> HaRET(8)# set GPDR(35) 0 
> HaRET(9)# set GPDR(37) 0 
> HaRET(10)# set GPLR(34) 1 
> HaRET(11)# set GPLR(35) 1 
> HaRET(12)# set GPLR(37) 1 
> HaRET(13)# set GPLR(39) 1
> HaRET(14)# 
> HaRET(15)# 
> HaRET(16)# set kernel "zImage"
> HaRET(17)# set initrd "initrd"
> HaRET(18)# set mtype "655"
> HaRET(19)# set cmdline "root=/dev/ram0 rw ramdisk_size=12288 keepinitrd 
> init=/linuxrc  console=tty0 console=ttyS0,115200n8 "
> HaRET(20)# boot
> Physical kernel address: a8008000
> Preloader physical/virtual address: ab1bf000
> Physical initrd address: a8408000
> Goodbye cruel world ...
>
> Last night I attempted haret version 0.3.6, which looks like it's actually 
> booting the kernel:
>
> Welcome, this is HaRET running on WindowsCE v4.21
> Minimal virtual address: 00010000, maximal virtual address: 7fffffff
> CPU is Intel ARM arch 5TE revision 0 product 17 stepping 4 running in system 
> mode
> Enter 'HELP' for a short command summary.
>
> HaRET(1)# set GAFR(34) 1 
> HaRET(2)# set GAFR(35) 1 
> HaRET(3)# set GAFR(37) 1 
> HaRET(4)# set GAFR(39) 2 
> HaRET(5)# set GAFR(40) 2 
> HaRET(6)# set GAFR(41) 2 
> HaRET(7)# set GPDR(34) 0 
> HaRET(8)# set GPDR(35) 0 
> HaRET(9)# set GPDR(37) 0 
> HaRET(10)# set GPLR(34) 1 
> HaRET(11)# set GPLR(35) 1 
> HaRET(12)# set GPLR(37) 1 
> HaRET(13)# set GPLR(39) 1
> HaRET(14)# set kernel "zImage"
> HaRET(15)# set initrd "initrd"
> HaRET(16)# set mtype "655"
> HaRET(17)# set cmdline "root=/dev/ram0 rw ramdisk_size=12288 keepinitrd 
> init=/linuxrc  console=tty0 console=ttyS0,115200n8 "
> HaRET(18)# boot
> Physical kernel address: a0008000
> Preloader physical/virtual address: aad6b000
> Physical initrd address: a0408000
> Goodbye cruel world ...
> Detecting if it's a pxa CPU.  69054114
> Detecting if it's a pxa CPU.  00000002
> skipping the draw thing
> Setting Thread Priority
> Disabling Multitasking
> Setting memory access permissions
> Changing to kernel mode
> Getting mmu
> Calling SetupLoad()
> Calling cli...
> Shutting Down peripherals
> flushing cache
> doing something funky wtih mmu and preloaderPA
> Starting the kernel.
> Machine type: 0000028f
> NumPages: 0000016d
> Memory Physical Address: a0000000
> Preloader PA: aad6b000
> TagKernelNumPages: 000000fb
>
> Still, the serial output is keeping up the silent attitude.
>   
-- 
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to